Lower Preview Scaling first when the timeline becomes smoother after reducing the preview image size but remains visually usable. Enable proxies when the problem appears tied to decoding the original media, especially when several high-resolution or difficult-to-decode clips are involved. These are related controls, not interchangeable switches: Preview Scaling changes the resolution processed for the preview, while proxy editing substitutes lower-resolution media during editing. Shotcut documents that proxy performance is intended to work together with Preview Scaling and that proxy resolution follows the current Preview Scaling setting. See the Shotcut Proxy Editing documentation.
Specific Diagnosis And Steps
Use one short section of the timeline containing the same complex motion, scaling, transitions, or filters for every comparison. Do not compare different scenes or change several settings at once.
- Record the source resolution, frame rate, and the filters or transitions in the chosen section. Play the section from the same position and note two separate observations: whether playback stays continuous and whether the image remains detailed enough to judge framing, masks, and timing.
- Reduce Preview Scaling by one available level. Repeat the same playback range. If motion becomes more continuous while the image remains adequate for editorial decisions, keep the lower setting during rough cutting. This is a pixel-processing decision, not evidence that the source has changed.
- Restore the comparison condition, then enable
Settings > Proxy > Use Proxy. If Shotcut offers to generate missing proxies, generate only the clips needed for this timeline section first. Existing proxies may be detected; newly added eligible media can be queued for proxy generation. - Wait for the relevant job to finish, confirm
(PROXY)beside the clip resolution in the Properties panel, and repeat the identical playback range. If proxies help while Preview Scaling alone did not, the source decoding or the combined decoding-and-processing load is a stronger suspect. - Choose the smallest intervention that preserves useful judgment. Keep Preview Scaling lower for a pixel-load problem. Use proxies selectively for clips that remain difficult to decode, and reassess after the proxy replacement is visible in the project.
An Acceptance Worksheet
The table below is an original, hypothetical worksheet, not a report of a software test. The numbers illustrate how to record a decision; they are not Shotcut guarantees.
| Hypothetical clip | Source and condition | Preview Scaling comparison | Proxy comparison | Observation | Decision |
|---|---|---|---|---|---|
| A: 4K camera move | 3840x2160, heavy motion, no proxy | 540p: mostly continuous; detail sufficient | Proxy at the current preview-related resolution: continuous; detail lower | Scaling alone meets cutting needs | Keep lower Preview Scaling; defer proxy |
| B: 4K compressed interview | 3840x2160, difficult decode, light filters | 540p: still pauses; image smaller | Proxy: continuous after proxy is active; face detail adequate for edits | Decode load is the stronger lead | Make a proxy for this clip |
| C: still image with pan and title | Large image, transform plus title | Lower scaling improves motion; text remains readable | No proxy needed for the decision | Pixel work, not source playback, dominates | Use lower Preview Scaling |
Treat “continuous” and “adequate” as observations you define for the project. The worksheet should record the actual control state and the clip’s Properties label, not infer success from a color, thumbnail, or filename.
Limits And Next Steps
Proxy generation is queued work, and Shotcut may continue using the original until the job completes. When proxies are enabled in an already-open project, Shotcut can reopen the project to locate them; reopening can clear undo history and reset selected clips. Plan the comparison around that behavior rather than assuming an immediate switch.
The documentation says eligible media excludes image sequences, alpha-channel media, and certain other cases, and that Properties > Proxy > Make Proxy can force generation for a selected clip. If a clip does not qualify automatically, use that supported per-clip route or leave it on the original. Do not assume every source can receive a proxy.
For normal export, Shotcut says proxy clips are replaced by original or converted files. A separate Advanced export option, Video > Use preview scaling, intentionally exports at preview resolution and uses proxies for a faster rough draft. Do not use that route for a full-quality master. The export behavior described in the official documentation also means a proxy can hide source-media problems, so inspect difficult clips again when the original is active.
Three Short Questions
Should I always enable both? No. Lower Preview Scaling is the quicker first comparison for pixel-processing pressure. Add proxies when original-media decoding remains the likely bottleneck or when several clips need lower-resolution editing media.
Why did enabling proxies not help immediately? The proxy may still be generating, the clip may be ineligible, or the remaining cost may come from filters, transitions, or another part of the timeline. Check the Jobs panel and the clip’s Properties label before judging.
Will a proxy reduce final quality? Normal export is documented to use the original or converted media, but an export explicitly using preview scaling is a rough-draft path. Confirm the export settings and do not treat the preview image as proof of final detail.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the film workspace. The external software controls discussed above belong to their respective products.