When Shotcut’s Properties panel shows “(PROXY)” beside a video or image resolution, treat the panel as a mixed-source readout: most displayed information describes the proxy, while a short, documented list of fields remains tied to the original or converted media. Do not infer that the source file’s resolution, frame rate, or color information has changed. If an exact source value matters, identify its field and verify the source file separately.
Identify the reading and verify the source
- Select the relevant clip and check whether its Properties resolution is marked “(PROXY).” If it is, note that proxy information is being shown before interpreting other values. This label is evidence of proxy use for that reading, not evidence that the source was rewritten.
- Separate documented exceptions from other fields. Shotcut says the clip name, duration, frame rate, aspect ratio, and color range remain exceptions when Properties shows proxy information. The panel usually shows information about the proxy file instead of the original or converted file for other information. Do not extend that exception list to fields the documentation does not name.
- Write down the exact source property you need. If it is one of the listed exceptions, the panel is documented to continue reflecting the original or converted media for that field. If it is another field, do not treat the proxy value as a confirmed source value.
- To verify a critical value outside that boundary, locate the source file via Properties’ supported Show In Files, Show In Folder, or Copy Full File Path menu options, then inspect that file independently with a suitable media-information tool. This is an editorial cross-check, not a claim that Shotcut adds a source-only Properties view.
- Keep overrides in mind. Shotcut says Properties should continue to reflect overrides where possible. If aspect ratio or color range has been overridden, record the panel value as an override-aware project reading, not as proof of the file’s untouched embedded value.
The Proxy Editing documentation describes the mixed-source display and the “(PROXY)” resolution label. The Audio/Video Properties documentation explains the source-file path options and distinguishes editable Properties values from embedded, non-editable metadata.
Record the evidence in a worksheet
Use one row per property you need for a decision. The observations below are a hypothetical example, not measured Shotcut output: a creator has a 3840×2160 camera file, a 960×540 editing proxy, and a Properties panel that marks the displayed proxy resolution. The example does not predict a particular field’s value or how a third-party media tool will label it.
| Property to confirm | Documented source while proxy is in use | Hypothetical observation | Decision | Check source separately? |
|---|---|---|---|---|
| Resolution | Usually proxy-file information; “(PROXY)” marks proxy resolution | Panel reads 960×540 (PROXY); source file is specified as 3840×2160 | Do not treat panel resolution as the source resolution | Yes, when source dimensions matter |
| Frame rate | Documented exception: original or converted media | Panel reads the value needed for the edit | Record as source-linked, subject to overrides or conversion context | Only if an independent confirmation is required |
| Aspect ratio | Documented exception: original or converted media | Panel displays the project’s relevant ratio | Keep any override in the record | If the untouched file value is required |
| Color range | Documented exception: original or converted media | Panel shows a range, possibly affected by an override | Record the panel value and any known override separately | If embedded source metadata is the question |
| Other displayed field | Usually proxy-file information; no universal exception is documented | Source status is unknown from the panel alone | Mark “unconfirmed” instead of inferring a source value | Yes, if consequential |
Limits and what to do when evidence is unclear
This method establishes what the documentation says the panel represents; it does not certify that a source file is correct, intact, or interpreted identically by every tool. Shotcut also warns that a proxy can hide a source-media problem, such as inaccurate frame-accurate seeking. A proxy image or a plausible Properties reading cannot rule that out.
If the displayed resolution is not marked “(PROXY),” do not assume from this guidance alone that every field is a source-file reading; the documented statement specifically describes Properties when using a proxy. If a critical field is not in the exception list, record it as proxy information unless you independently verify the source. For file identity, use the Properties path actions to open or copy the selected file’s path, then confirm you are examining the intended source rather than a similarly named proxy. The menu also offers More Information and Start Integrity Check Job, but neither should be presented as a guaranteed source-only metadata report.
Common follow-up questions
Does a proxy resolution reading mean Shotcut changed my original file?
No such conclusion follows from the panel. The documentation describes Properties as showing proxy-file information for most fields while proxy use is active; it does not say that this display changes the original media.
Which values are explicitly exceptions to proxy information?
The documented list is clip name, duration, frame rate, aspect ratio, and color range. Shotcut says these remain tied to the original or converted media, with overrides reflected where possible. Do not assume unlisted fields behave the same way.
Where can I get the source file’s path from Shotcut?
In the selected clip’s Properties menu, use Show In Files, Show In Folder, or Copy Full File Path. Those actions help you locate the selected file; independently inspect it when a source value outside the documented exceptions matters.
Sources and next step
- Settings > Proxy Editing - Documentation - English - Shotcut Forum
- Audio/Video Properties - Documentation - English - Shotcut Forum
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the film workspace. The external software controls discussed above belong to their respective products.