
REAPER does not combine overlapping video in the same way that it mixes overlapping audio. By default, a video priority rule selects the displayed picture, even while audio from multiple tracks remains audible. With free item positioning on one track, the manual says the bottommost video item has display priority.
Key Takeaways
- Hearing two sources does not establish that both pictures are being composited.
- By default, video on lower-numbered tracks overrides higher-numbered tracks.
- Free-positioned items on the same track follow their own bottommost-item rule.
Identify which kind of overlap you have
For a hypothetical short-film assembly, two video clips can overlap on separate tracks or occupy different vertical positions within one free-positioned track. Note which structure you actually have before deleting media or changing audio gain.
Play a short interval where the sources differ visibly and audibly. Hearing both voices while seeing one picture is not by itself evidence that the second file failed to decode. Nor does it prove the intended picture/audio association is correct.
Check the project's video processing hierarchy
The REAPER 7.81 guide, section 20.3, describes the default bottom-to-top video processing order: a lower-numbered track overrides a higher-numbered one, with the master processed last.
The Video page of Project Settings can reverse that hierarchy. Inspect the actual project choice instead of treating screen position as a universal rule. Reordering tracks or reversing the project policy can affect other overlapping video throughout the edit.
This controls video priority; it does not replace the separate audio routing or send relationships.
Inspect overlapping items within one track
When free item positioning places multiple video items on one track, the manual gives priority to the bottommost item. Do not infer simultaneous picture blending from their separate vertical lanes or from the fact that both audio sources play.
In a preserved copy, inspect the overlap at a recognizable frame and identify which item owns that bottom position. Check existing effects before attributing every visible result to the default rule.
Build the intended visual combination explicitly
REAPER documents using video effects and automation to override default behavior and determine which or how many items display. Decide whether the scene requires a cut, transition or actual combined view; mere temporal overlap does not specify that creative operation.
The guide also distinguishes item video effects from track effects, which process the item-effects output. Keep that processing scope visible while diagnosing the result.
Accept when the displayed source or deliberate composition matches the brief and the audio remains intentionally mixed. This proposed inspection reports no performed video-compositing test and does not promise that changing priority preserves an existing transition.
Related tasks
- Moving Video Leaves Its Audio Behind: Check Clip Links and Linked Selection
- Why Does Reverb Stay Loud When I Lower the Voice Fader in Premiere?
Sources and scope
- REAPER User Guide 7.81: Section20.3: audio processes all tracks/items by default; video defaults bottom-to-top, lower-numbered tracks override higher, master last. Free item positioning displays bottommost item. Project Settings Video can reverse hierarchy; effects/envelopes override default and track FX process item FX output.
Based on the official REAPER 7.81 user guide downloaded and read on October 23, 2026. Proposed comparisons have not been executed; no measured result, completed repair or hands-on test is claimed.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: William Liu / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.