
A REAPER track in Free item positioning always mixes its media items, ignoring the ordinary item-mix preferences. If overlapping sound continues after you change the general preference, inspect this track mode before assuming the software failed to apply your choice.
Key Takeaways
- Free-positioned items are independent items, not alternate takes.
- The track mode overrides normal item-mix behavior.
- Vertical layout and enabled auto-crossfades need separate inspection.
Identify the actual objects sharing the track
A narration edit may contain a main voice and another short sound on the same track. Confirm that they are separate media items. Do not confuse them with several takes inside one item, where a different take-playback policy applies.
The REAPER 7.81 manual, section 7.28, describes free item positioning as allowing several items to overlap and play simultaneously on one track.
Inspect the track-specific mode
Right-click the Track Control Panel and inspect Free item positioning. The guide documents this entry and the item-height handles associated with the mode. A spacious layout is useful evidence of arrangement, but inspect the actual setting rather than relying on appearance alone.
The manual explicitly states that normal item-mix preferences are ignored on these tracks. Changing that general preference therefore does not establish a new playback policy for an already free-positioned track.
Check transitions as well as simultaneous playback
The same section notes that vertically overlapping media items can crossfade when auto-crossfade is enabled. Otherwise their vertical placement does not determine playback. Moving an item higher in the track should not be treated as a universal command to make it the sole audible item.
For an unexpectedly loud overlap, inspect the actual contributions and transition. The correlated-crossfade guide explains a separate reason a combination can become louder.
Accept intentional membership and a readable layout
On a project copy, isolate the relevant items using their mute controls and verify which sources contribute during the overlap. Decide whether both should play or whether the arrangement needs a deliberate revision. Do not delete the only alternate source merely to simplify the display.
The same-track versus composite transition guide concerns another editor's transition structure, not this REAPER override. Accept when the intended items contribute and the track mode is documented. No audio mix, crossfade or playback test has been executed here.
Related tasks
- Why Does an Audio Crossfade Suddenly Get Louder in the Middle?
- Kdenlive: Same-Track Mix or Overlapping Composite Transition?
Sources and scope
- REAPER User Guide 7.81: Section7.28 pp142–143 contextTCP Free item positioning; independentitems; itemmixpreferencesignored alwaysmix; verticalpositiondoesnotaffectplayback exceptauto-crossfade overlapsvertically; auto-repositionorganizeslayout.
Based on the official REAPER 7.81 user guide downloaded on October 23, 2026. Proposed checks have not been executed; no recording, crash-containment test or measured result is claimed.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: William Liu / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.