Choose a same-track Mix when the two video clips are adjacent on one track and you want a transition at their shared edit. Choose a composite transition when the clips overlap on different tracks, or when you need to control which lower track the transition uses. Before choosing Mix, check that each clip has at least half a second of available frames at the boundary; if not, reconsider the selected source ranges or track layout, then recount the unused frames at each relevant boundary.
Decide from the edit structure
Kdenlive documents two distinct arrangements: Mix joins adjacent clips on the same track, while a composite transition operates on clips overlapping across tracks. That structural choice comes before the wipe or dissolve style. See the official overview of Kdenlive transitions.
- Zoom in on the intended cut and identify the two video clips. Confirm whether they are adjacent on the same track or overlap on separate tracks.
- If they are adjacent on one track, count the usable source frames at the outgoing end of the first clip and the incoming start of the second. Kdenlive requires at least half a second on either side for a Mix. This means spare frames from the source, not merely empty space on the timeline.
- If both sides meet that requirement, use Mix. Kdenlive lets you add one by double-clicking the line between the clips, selecting a clip and pressing
U, or using the timeline toolbar button. The manual says the default Mix is one second and uses a Luma composition; its duration and properties can be adjusted. - If the clips must remain on different tracks, arrange the desired overlap and use a composite transition. Check the transition’s Composition Track setting: its default is Automatic, meaning the track immediately below, but another track can be selected. The composite-transition instructions describe these controls.
- If Mix lacks the required source frames, inspect the source material at the specific outgoing and incoming boundaries. Re-plan the selected ranges only if recorded footage and the intended action allow it, then recount the handles. A trim direction alone does not establish sufficient frames. Otherwise consider a suitable overlapping-track arrangement or retain the cut; these options do not create footage.
Use the clip’s actual transition or composition type label when checking what you added. A timeline color may help locate an object, but color alone does not establish its type.
Use a frame-and-track worksheet
The following is a hypothetical planning example, not a Kdenlive test or a promised software result. Assume a 24 fps project. The manual’s half-second Mix requirement converts to 12 frames per side in this example: 24 frames per second multiplied by 0.5 seconds. Record the available source handles, not just the visible overlap length.
| Boundary or decision | Hypothetical observation | Decision or acceptance check |
|---|---|---|
| Left clip at the cut | 14 unused source frames remain | Meets the 12-frame example threshold; keep this side available for Mix |
| Right clip at the cut | 9 unused source frames remain | Below the example threshold; re-plan source ranges if possible and recount before choosing Mix |
| Track arrangement | Clips are adjacent on V1; no second-track overlap is planned | Mix matches the intended structure if both sides meet the requirement |
| Alternate arrangement | A foreground clip overlaps a lower clip; transition should use V1 | Choose a composite transition and confirm its Composition Track label identifies V1 |
| Playback review | Both images appear through the intended boundary in the preview | Check for an unintended gap, freeze, or wrong underlying image before accepting |
The frame counts are planning observations in a fictional edit. The manual specifies the half-second requirement, but this worksheet does not assert how Kdenlive measures every boundary case or guarantee an outcome for particular media.
Limits and next steps when it fails
A Mix is not a way to stretch a clip beyond its recorded source. Timeline space does not supply missing footage. If the available handles are short, check whether reselecting the used source ranges can leave sufficient unused frames at the relevant boundaries without losing the intended action. Recount after any adjustment; if it remains unsuitable, consider a different track arrangement or retain a cut. A composite transition, in turn, requires two clips on different tracks to overlap for the transition’s duration. Set the overlap to the time you want, then verify the composition track rather than assuming the visually lower clip is always the intended target.
If the transition appears but blends the wrong image, inspect its Composition Track setting and the labels of the tracks involved. If no transition appears, confirm the clips satisfy the relevant arrangement and source-frame requirement, then inspect the selected object’s actual type. These checks diagnose structure; they do not promise to repair missing media. Accept the edit only after separately reviewing the transition image, the content immediately before and after it, and the selected composition target.
Three quick questions
Does a Mix require clips on separate tracks? No. It is for adjacent clips on the same track; separate-track overlap is the composite-transition arrangement.
Is the 12-frame threshold universal? No. It is the arithmetic example for half a second at 24 fps. Use the project’s actual frame rate when translating the documented time requirement.
Can I choose a lower track for a composite transition? The manual documents a Composition Track control, defaulting to Automatic (the track immediately below), with other tracks selectable.
Sources and next step
- Mixes / Same-track Transitions — Kdenlive 26.08 Manual 26.08 documentation
- Composite Transitions — Kdenlive 26.08 Manual 26.08 documentation
- Transitions — Kdenlive 26.08 Manual 26.08 documentation
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the film workspace. The external software controls discussed above belong to their respective products.