
REAPER offers two different take-explosion destinations: Take > Explode all takes to new tracks creates additional tracks while retaining the original take item; Take > Explode all takes (in place) arranges the takes in a single lane. Choose the structure you need before changing a narration comp. Exploding takes is not a command to select the best reading automatically.
Key Takeaways
- New tracks give the alternatives separate track destinations.
- The original multi-take track remains after the new-track operation.
- In-place explosion changes the arrangement within one lane; inspect overlaps before continuing.
Choose the editing structure
A hypothetical short-film voiceover contains three readings of the same line. If each reading needs independent track processing or visible track-level editing, separate tracks make that intention explicit. If the aim is to arrange the chosen pieces within one track, in-place explosion provides a different structure.
The REAPER 7.81 guide, sections 8.2 and 8.4, documents both commands. Its three-take example creates three additional tracks while leaving the original intact. Do not treat that retained source track as an unexpected extra recording.
Explode into new tracks deliberately
Save a working revision, identify the item with the intended takes, and use its context menu: Take > Explode all takes to new tracks. Name the new tracks according to their actual readings before editing phrases. Confirm the original still contains its alternatives.
When auditioning the separated readings, control which tracks are heard. In the manual's editing example, the original is muted after chosen pieces are assembled. Keeping an audible original alongside its derived material can confuse the comparison. This is not the same task as deciding which muted tracks an Audacity explicit mix includes.
Use in-place explosion for a different arrangement
On a separate working revision, the in-place command places the takes into one lane, with selected items over the other takes in the documented example. Inspect item boundaries, overlap and retained item properties. Do not assume that the visible top item alone establishes every playback condition.
If the actual requirement is simultaneous take playback, inspect that separate setting rather than using explosion as its substitute. The manual treats Play all takes independently in section 8.5.
Accept the new structure before comping
For the three-reading example, compare the take inventory before and after the chosen command. Audition a recognizable phrase from each resulting item, then inspect which original or alternatives remain audible. Preserve the source revision until the selected reading is accepted.
These are proposed checks, not a performed REAPER session. Track separation also does not create delivery stems with a common start: that subsequent requirement belongs to the stem reconstruction check.
Related tasks
- Why Do Delivered Dialogue, Music, and Effects Stems No Longer Line Up?
- Why Did a Muted Audacity Track Reappear After Mix and Render?
Sources and scope
- REAPER User Guide 7.81, sections 8.2-8.5: New-track explosion creates additional tracks and retains the original; in-place explosion arranges takes in one lane; Play all takes is a separate setting. Verified local text lines 8853-8918.
Based on the official REAPER 7.81 guide, sections 8.2-8.5, read on October 23, 2026. The narration example and acceptance checks are proposed editorial guidance, not hands-on software tests.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Mak Cézar / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.