
For an OpenToonz Toonz Raster level, inspect Use the TLV Savebox to Limit Filling Operations when a fill stops at an unexpected outer boundary. That preference chooses between the image border and its Savebox as the filling limit. It is a different issue from a gap in the drawn outline.
Key Takeaways
- This preference concerns TLV fill bounds.
- An outer limit and a leaking line boundary need different diagnoses.
- Review the changed preference on a copy before filling many drawings.
Locate where the fill stops
The OpenToonz 1.7.1 painting guide explicitly documents the image-border versus Savebox limit under Preferences > Tools. First confirm the selected level is Toonz Raster.
Keep a saved level copy. Identify whether the failure follows an outer rectangular bound or a drawn line. A flood escaping through a broken contour calls for inspecting the contour and Fill options. Changing the outer fill limit is not proof that the linework became closed.
Compare the preference with a small fill task
Record the current preference, select an appropriate fill style and inspect the intended target drawing. Change the Savebox-limiting option only for a controlled comparison, then repeat the fill on a clean copy of the same drawing.
Observe where the fill reaches and whether it changes empty surroundings that should stay transparent. The larger filling region is not automatically the correct one. Its suitability depends on whether the brief needs a contained character region, an outer area or another specific result.
Proposed example: color around a compact ink drawing
Suppose a compact ink drawing sits inside a larger level image and an outside fill stops earlier than expected. Compare the Savebox-limited and image-border routes on separate copies. Record which boundary is responsible rather than increasing Fill Depth until something changes.
This example is a proposed check. It does not report a supplied Savebox measurement or promise that every apparent empty region can be filled. A style unsuitable for area filling or a different active level is a separate condition.
Inspect the whole intended region after filling
Accept when the intended area is filled, required transparency remains and neighboring enclosed areas are intact. Review more than the clicked point, including the outer corners and fine line edges.
If the boundary does not change as expected, recheck the level type, active drawing and preference. If color leaks across lines, return to the line-boundary diagnosis. Save the accepted level and record the preference used so a later cleanup or fill pass can be compared meaningfully.
Related tasks
- Why Can’t I Paint in the New Border after Enlarging a GIMP Canvas?
- Should You Drag a Krita Palette Swatch to the Layer Stack or the Canvas?
- Why Does a Photoshop Layer’s Shadow Remain When Fill Is Zero?
Sources and scope
- OpenToonz1.7.1 official documentation: Preferences Tools can limit Toonz Raster filling to the TLV Savebox rather than image bounds.
Based on the OpenToonz 1.7.1 published manual, including saved official full-body capture read on 2026-10-23. Later releases are not assumed equivalent. Examples and acceptance checks are proposed editorial procedures, not executed software tests. No measured query frequency or AI citation frequency.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Paparazzi Ratzfatzzi / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.