
Editing an OpenToonz drawing changes every exposure that refers to that drawing. A second Xsheet cell is not automatically an independent copy of its artwork. Use Duplicate Drawing when a held pose needs a separately editable variation, then expose the new drawing where the variation belongs.
Key Takeaways
- Scene frames refer to numbered drawings in a level.
- Repeating an exposure repeats that reference.
- Duplicate the drawing before painting an independent change.
Compare drawing numbers before painting
The OpenToonz 1.7.1 level-editing guide separates editing the drawings in Level Strip from arranging their exposures in the Xsheet or Timeline. Look at the level name and drawing number in the affected cells. Two different scene frames can both show drawing 1.
Save the scene and level before experimenting. Select one affected cell, inspect its drawing in Level Strip, then compare another cell that changed. If both reference the same drawing, the shared change is expected. This is different from an onion-skin overlay or a playback cache.
Create a new drawing for the new pose
In Level Strip, select the drawing that should supply the starting artwork and use Cells > Duplicate Drawing, also available from its context menu. The command copies the first selected drawing into the following frame. If that following position is already occupied, insertion shifts the subsequent drawings; inspect their references and timing before continuing. Inspect the resulting independent drawing number before editing it. Expose that new drawing only over the intended variation interval.
Do not merely extend the existing exposure and assume that the extended part has become independent. Likewise, copying an exposure reference is not a substitute for creating a new drawing. Keep a record of which scene cells should still use the original pose.
Proposed example: one blink in a held face
Suppose a face holds for several frames but needs one blink. Preserve the original open-eye drawing. Create an independent drawing for the blink, edit that new drawing, and assign it to the planned blink cells.
Compare a pre-blink cell, a blink cell and a post-blink cell. The original eyes should remain unchanged outside the intended interval. This is a proposed editing check, not a reported animation test.
Verify the content and the exposure schedule
Inspect both drawings in Level Strip, then play the scene interval. Accept when the new pose differs as intended, the original remains intact and the timing of the blink matches the plan.
If another pose changes unexpectedly, inspect its drawing reference before painting over it. A level can intentionally reuse the same drawing elsewhere in the scene. Fix the identity or exposure assignment rather than trying to hide a shared edit with extra timeline cells.
Related tasks
- Editing One Nested Intro Changes Every Copy: Is the Source Sequence Shared?
- Use Krita Onion Skins to Diagnose AI Pose Jitter
- Replace an AI-Generated Clip Without Losing Track of Its Timeline Uses
Sources and scope
- OpenToonz1.7.1 official documentation: Level Strip edits drawing content; Duplicate Drawing creates a separate drawing rather than another exposure.
Based on the OpenToonz 1.7.1 published manual, including saved official full-body capture read on 2026-10-23. Later releases are not assumed equivalent. Examples and acceptance checks are proposed editorial procedures, not executed software tests. No measured query frequency or AI citation frequency.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Paparazzi Ratzfatzzi / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.