The printer’s ICC profile is only one part of the soft-proofing decision. In Krita, use the profile supplied for the relevant printer, ink, and paper, then match the rendering intent and black-point compensation to the conversion method specified by the print house. Check gamut clipping separately from paper-white and black-ink simulation. These screen views are decision aids, not a guarantee of the physical print.
Judgment and Steps
- Confirm the production contract. Record the exact ICC filename, the paper and ink combination it represents, whether the print house converts the submitted file, and which rendering intent and black-point compensation it uses. Do not choose a generally recommended option when the printer has supplied a different workflow. Krita’s manual says the proofing profile and conversion settings should agree with the print house’s process. See the official Krita soft-proofing documentation.
- Enable Canvas Graphics Acceleration. Soft proofing depends on it. Open the image’s soft-proofing properties through
Image > Image Properties > Soft Proofing, or use Krita’s global soft-proofing settings when the configuration is not stored in the image. Select the printer’s profile and enter the agreed rendering intent and black-point compensation. IfStore Softproofing configuration in the imageis enabled, Krita stores the proof settings and embeds the complete ICC profile in the.krafile; consider the resulting file size before using this for many documents.
- Compare the working view with the proofed view.
Ctrl+Ytoggles soft proofing per view, so use two views when you need a direct comparison. Keep the source image unchanged while noting changes in saturated colors, neutrals, and shadows.
- Run two separate checks. For a gamut-range check, use a custom display mode with Relative Colorimetric and black-point compensation enabled, then activate Gamut Warning with
Ctrl+Shift+Y. Gamut Warning requires soft proofing to be active. For a paper and contrast check, use Absolute Colorimetric with Absolute Intent Chromatic Adaptation enabled. This mode is intended to show the paper’s white-point effect and contrast losses; it is not the same question as which colors fall outside the output gamut. The manual describes these as different display goals. See the Krita manual’s display-mode guidance.
A Hypothetical Acceptance Worksheet
The following is an author-designed worksheet based on documented Krita controls, not a test result or a promise about a particular printer.
| Check | Assumed record or observation | Decision | |
|---|---|---|---|
| Profile contract | coated-paper-v3.icc; printer converts; Relative Colorimetric; compensation on | Use these values for conversion and document them | |
| Gamut view | Warning color appears over two bright green highlights and one blue logo | Review those regions; do not infer that every warning area will print identically | |
| Paper simulation | Absolute Colorimetric plus adaptation makes the white background warmer and lowers apparent contrast | Review light neutrals and shadow separation as a paper-effect concern | |
| View comparison | Ctrl+Y changes the proofed view while the unproofed view remains available | Keep both views for comparison; do not recolor solely because the preview changed |
A practical acceptance record should identify the affected layer or region, the active display mode, and the decision made. The warning color is a locator, not a measurement of printed color.
Limits and the Next Step After Failure
Soft proofing cannot reproduce every viewing condition. Krita notes that physical-screen comparison requires the paper, display, and illumination white points to coincide, which is rarely exact. Therefore, a convincing screen preview does not establish that a print will match. The manual also warns that soft proofing does not work properly in floating-point spaces and that gamut alarms can be unreliable for some linear profiles in shadows.
If the preview is unexpectedly extreme, first verify acceleration, profile identity, paper assignment, and the print house’s conversion settings. If the profile or intent is unknown, ask the printer before changing the artwork. If the screen decision remains consequential, request or make a controlled proof using the same paper and documented conversion route. Treat that as a separate physical check, not as proof that Krita’s display is wrong.
Three Short Questions
Should I convert the whole image to CMYK first?
Not automatically. The manual presents RGB work with on-the-fly proofing as a way to preserve flexible editing while previewing a specified output space. Convert only when the agreed delivery workflow requires it.
Which display mode should I always use?
None universally. Use the gamut-oriented mode to locate clipping and the paper-simulation mode to inspect white-point and contrast effects. The printer’s conversion contract determines the conversion settings.
Why does Gamut Warning do nothing?
Check that soft proofing is active, Canvas Graphics Acceleration is enabled, and the document is not using a floating-point space where Krita disables or cannot correctly perform the feature.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.