
Krita's Mesh transform uses locked editing by default to maintain neighboring curvature. Moving one segment can therefore move a neighboring segment in another patch. Hold Shift while dragging the relevant segment or control point when you intentionally need an unlocked edit or a sharp angle.
Key Takeaways
- The neighboring movement can be continuity preservation, not a mistaken selection.
- The cursor's lock indicator identifies the locked editing state.
- Use an unlocked edit only where the design actually needs a break in curvature.
Decide whether the surface should be smooth
Imagine placing a decorative image across a curved product mockup. A smooth side surface should carry a continuous bend; a folded corner may need a visible directional break. Those two regions need different geometric behavior.
The Krita Transform Tool manual explains that Mesh consists of patches with Bézier curve segments. Its locked mode adjusts neighboring segments to preserve curvature and shows a lock icon in the cursor.
Keep a source copy and identify the join that should remain smooth or become sharp. Do not unlock every edit simply because an adjacent patch moves.
Compare locked and unlocked movement locally
Enable Show control points in the Mesh tool options when the finer controls are needed. Inspect the segments on both sides of the shared join.
With ordinary locked movement, adjust the relevant segment and watch the neighboring patch. The coupled change is useful when it preserves a smooth surface. If the brief requires a corner, use the documented Shift-drag on the segment or control point to disable that coupling for the edit.
Compare the local result before moving another control. Shifting several unrelated nodes at once makes it harder to tell whether the desired corner or an accidental kink caused the change.
The manual also notes that after a sharp angle has been created, locked editing tries to preserve that state. Releasing Shift does not mean every previously created corner will automatically become smooth again.
Inspect the whole mapped image
For the proposed product composition, inspect the fold and the adjacent image detail. The intended corner should be clear, while a region meant to be continuous should not acquire an abrupt bend.
Also read any recognizable logo or lettering. A geometrically smooth mesh can still distort a mark beyond what the creative brief allows. Keep the approved source and describe the result as a warped image, not as a newly manufactured or measured product surface.
If your source is linked externally, the File Layer and transform-mask guide covers preserving that dependency. If you are revising a stored transform mask, check its stored-mode behavior separately. Mesh continuity controls do not decide either of those document-structure questions.
Related tasks
- Should I Keep a Krita File Layer Linked or Convert It for Direct Editing?
- Why Does Changing Transform Modes Undo My Krita Transform Mask?
- Can I Send Vector-Looking AI Artwork to a Cutting Plotter?
Sources and scope
- Transform Tool: Official documentation for the controls and limits discussed above.
Official documentation synthesis; no hands-on test, search-volume or measured citation-rate claim. Scenarios and comparisons are proposed editorial examples, not reported experiments.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: AI-generated conceptual editorial illustration; not a real application screenshot, observed output or before-and-after test.