Use even divisions when your sprite sheet needs equal-sized rows and columns; use guides when slice boundaries must follow specific, potentially uneven positions. In Krita’s Image Split, the horizontal and vertical values count dividing lines, not resulting bands: four lines create five bands in that direction. Plan the intended boundaries first, then choose the method that matches them.
Choose a method and set it up
- Map the artwork’s boundaries. For a regular icon grid, note the intended number of cells across and down. For a character sheet with differently sized poses, mark the required boundaries on the document and decide where guides should go. These are project-specific choices; the manual does not prescribe a layout.
- Translate cell counts into line counts. If you need five bands across or down, the documented example says to enter four dividing lines in that direction. Check horizontal and vertical counts separately. Do not enter the desired number of bands as though it were the number of lines.
- Open Image Split. In Krita, go to Image > Image Split. For a uniform grid, use the horizontal and vertical line counts. If the planned boundaries should follow image guides instead of evenly spaced divisions, enable Use Guides. The manual describes guides as an alternative that provides more control; it does not say that existing guides automatically create an even grid.
- Compare the result with the boundary plan. Before accepting the slices, inspect representative intersections and edges against your intended layout. Check that a dividing boundary does not pass through a face, hand, prop, or other artwork that must remain intact.
Hypothetical boundary acceptance worksheet
The following invented example is a planning aid, not a report of software testing or a guarantee about Krita’s output. Suppose a character sheet has five poses across: two narrow poses, one wide pose, and two more narrow poses. The desired boundary positions, measured from the canvas’s left edge, are 180, 390, 720, and 910 pixels. The project also has five rows of equal height. These coordinates express the artist’s intended layout; they do not imply a particular guide-placement or pixel-rounding algorithm.
| Review item | Hypothetical observation | Decision |
|---|---|---|
| Number of bands across | Five desired poses; four intended boundaries | Use four vertical dividing lines for an even split only if equal widths are acceptable; otherwise use guides at the planned boundaries. |
| Width variation | The middle pose is wider than the others | Prefer guide-controlled boundaries if preserving those unequal widths is a requirement. |
| Subject crossing a boundary | A hand sits close to the planned 720-pixel boundary | Inspect that slice edge; if the hand is divided, revise the project’s boundary plan before accepting it. |
| Rows | Five equal-height rows are required | Four horizontal lines match the documented line-count example for five bands. |
For a real sheet, replace these invented positions and observations with your own. The table is a review aid, not a claim that Krita will produce those exact pixel dimensions.
Limits and what to do next
Even divisions suit layouts whose cells are meant to be uniform. They are a poor fit when the layout requires different widths or heights. Guides offer boundary control, but the cited manual does not specify how guide positions are rounded to pixels, how many guides are required for a particular layout, or how Image Split handles artwork touching an edge. Do not assume those details from the control name.
If a representative slice cuts through an important subject, pause and adjust the intended boundary or guide placement, then review the affected edge again. If a supposedly uniform layout does not match the intended cells, verify the line counts and whether equal spacing is actually appropriate. For behavior beyond what the manual describes, consult the Krita Image Split documentation; treat any additional workflow checks as your own verification, not a documented guarantee.
Common questions
Do four lines make four slices?
No. The manual’s example says four horizontal lines produce five horizontal stripes; it gives the same relationship for vertical lines.
Can guides make unequal slices?
The manual says guides can replace even divisions as horizontal or vertical split lines and provide more control. That supports using them for planned, non-uniform boundaries, but does not document their placement algorithm.
Should I add guides and expect equal spacing?
No. Plan guide positions against the required boundaries. The documented guide option uses guides instead of even divisions; it is not described as automatically spacing them evenly.
The Krita manual’s Image Split reference documents the line-count example and the guide alternative. The worksheet above is an editorial planning example, not a software test.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.