
Check both Preview and Real under the Cage transform's Adjust Granularity controls. Preview granularity and final-result granularity are separate. In Krita, a lower granularity value means a finer, higher-quality transformation, with slower processing; a high value can produce blockiness.
Key Takeaways
- Preview controls the interactive cage preview.
- Real controls the final result's granularity.
- Judge the applied contour at the delivery scale rather than approving the preview alone.
Identify which stage contains the defect
Suppose a decorative photographic ribbon is being curved around a portrait card. Its working preview seems acceptable, but the applied edge has an angular or blocky transition. Before redrawing the cage, record the Preview and Real values.
The Krita Transform Tool manual documents those separate settings. It recommends a higher Preview value than Real to keep adjustment responsive while using finer precision for the final result.
This is distinct from a transform mask changing modes unexpectedly. The stored transform-mask mode guide covers that state change; granularity addresses the cage grid's precision.
Compare the final setting without changing the cage shape
Preserve the source and work on a duplicate. Keep the intended cage deformation consistent while comparing granularity, so that a different contour is not mistaken for a quality improvement.
- Select the Cage transform's granularity controls.
- Note the current Preview and Real values.
- If interaction is slow, keep a coarser Preview where it remains useful.
- Reduce Real granularity for a finer final evaluation.
- Apply the proposed result and inspect the edge that showed the defect.
Do not reverse the direction of the adjustment: raising the number is not the documented route to finer cage precision. Equally, do not choose an arbitrarily low value as a universal preset; the useful balance depends on the image and the required deformation.
Separate geometric intent from evaluation quality
A finer grid cannot make a deliberately awkward cage contour attractive. Check two conditions independently: whether the ribbon has the intended shape, and whether that shape is rendered smoothly enough.
Inspect the applied edge and any internal straight features. Then view the composition at its intended output size. If the final edge is acceptable but editing is slow, adjust Preview for responsiveness instead of immediately sacrificing the Real setting.
If the source is a File Layer, also confirm how the transform is being applied using the linked-layer versus direct-editing guide. Keep the approved deformation and original source identifiable. Acceptance is the observed applied result meeting the brief, not a fast preview or a particular granularity number.
Related tasks
- Why Does Changing Transform Modes Undo My Krita Transform Mask?
- Should I Keep a Krita File Layer Linked or Convert It for Direct Editing?
- How Large Can You Print a Generated Image?
Sources and scope
- Transform Tool: Cage Adjust Granularity controls precision: lower values improve quality and reduce speed; high values can look blocky. Preview and Real are separate settings, and the manual recommends a higher Preview value than Real for responsiveness.
Official documentation synthesis; no hands-on test, search-volume or measured citation-rate claim. Scenarios and comparisons are proposed editorial examples, not reported experiments.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: AI-generated conceptual editorial illustration; not a real application screenshot, observed output or before-and-after test.