When Krita’s timeline shows no audio waveform, you can still align AI key poses by listening during playback and scrubbing through frames. Krita’s manual documents both behaviors and notes that its interface has no visual waveform. Mark the frame where you hear the intended cue, then check the pose around that frame rather than estimating from memory. The table below is an author-recommended review method, not a built-in Krita feature.
Locate the cue and choose a frame
- Open the Timeline Docker and use its speaker-icon Audio Menu to load the audio file. Confirm that the intended track is not muted and set a comfortable playback volume. Krita documents support for common formats including WAV, FLAC, OGG, and MP3. The audio controls and file-loading steps are documented here.
- Press Play to hear the audio while the animation plays. Note a rough location for the event you want to match: for example, the first consonant of a spoken word, the beginning of a pause, or a music beat. Treat these as different cues; a beat is not necessarily the same point as a note’s sustained sound.
- Scrub the timeline around that rough location. Krita plays the audio chunk associated with the frame you move to. Move in smaller increments as you approach the event, listen again, and write down the frame number at which the cue is clearest. The manual describes this as frame scrubbing with audio; it does not promise waveform-based or automatic cue detection.
- Place or adjust the intended key pose at the chosen frame. Scrub to the frames immediately before and after it, then replay the short passage. Decide whether the anticipation, pose, and release read in time with the cue. This neighboring-frame check is an editorial comparison method, not an additional Krita timing feature.
- Record what you heard and what you changed. If another person will continue the file, keep the referenced audio file at its current path or plan to load it again if it is moved: Krita stores its location in the document, not a copy of the audio itself. The manual explains this path dependency and the render audio option.
Use an event and pose worksheet
This hypothetical example shows a way to capture observations; its frame numbers and timing are not measured results or guaranteed behavior. The creator hears a short spoken cue near frame 48 and initially tests a reaction pose at frame 49. After replaying, the creator judges that pose late, moves the pose to frame 48, and records that final choice. “Offset” records the creator’s comparison, not a Krita-calculated value.
| Event | Heard location | Candidate frame | AI pose | Before/after check | Replay result and decision |
|---|---|---|---|---|---|
| Dialogue onset | First clear consonant, roughly 1.6 s | 49 initially; 48 final | Head turns toward speaker at frame 48 | Frame 47 anticipates; frame 49 holds the turn | Hypothetical replay: frame 49 seems late; move the pose to frame 48 and replay |
| Pause | Brief gap after the line, roughly 2.3 s | 69 | Character settles | Frame 68 still moves; frame 70 is still | Hypothetical replay: settle reads inside the pause; keep and note the cue |
| Music beat | Percussive attack, roughly 3.0 s | 90 | Hand reaches its endpoint | Frame 89 approaches; frame 91 holds | Hypothetical replay: endpoint feels early; compare one nearby frame on each side |
If a cue is hard to identify, record a frame range rather than claiming an exact instant. Replaying the passage and checking its context can help distinguish a speech onset from a pause or a beat from a sustained musical sound. The manual does not define a standard event-labeling system or guarantee a particular frame’s perceptual fit.
Know the limits and recover from ambiguity
No waveform means there is no visual amplitude trace to inspect in Krita’s timeline, but it does not prevent listening-based alignment. Scrubbing offers audio associated with the selected frame, while Play provides synchronized playback with animation. Use both: playback establishes the passage in context; scrubbing narrows the location. Neither establishes that an AI pose is expressive or correct by itself.
If scrubbing produces no audible cue, first check that audio is loaded, unmuted, and audible during Play. If playback works but the cue remains ambiguous, use a broader frame range, listen to the surrounding passage, and record the uncertainty rather than inventing precision. If the referenced file was moved or renamed, Krita may not find it; reload it through the Audio Menu. For a rendered animation, the manual says to enable Include Audio in File > Render Animation when audio should be included. That export setting does not resolve pose timing.
Common questions
Should the pose always land on the exact speech onset?
Not necessarily. Use the onset as a reference, then judge whether the pose’s approach and hold suit the performance. The frame choice is an editorial decision.
Does scrubbing show the sound’s waveform or exact transient?
No. The documented behavior is audio playback associated with the frame being scrubbed. The manual says Krita has no visual waveform display.
Will the audio travel inside the Krita document?
The document stores the audio file’s location. Moving or renaming that file can break the reference, so keep its path stable or reload it when needed.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the film workspace. The external software controls discussed above belong to their respective products.