A visible assistant is not, by itself, proof that your brush stroke is being constrained. Krita documents assistants as usable either for a preview shape or for snapping with the Freehand Brush Tool; the tool’s options contain a separate Snap to Assistants toggle. If you want to inspect perspective or a curve without changing your freehand marks, leave snapping off. Turn it on only when you need a stroke to follow the assistant, and verify the result with a deliberately off-line mark.
Decide and compare the two states
For a perspective study, use a ruler or vanishing-point assistant already placed for the lines you want to inspect. For a curve, use a Spline assistant. The manual describes the ruler as helping draw a straight line, the vanishing-point assistant as guiding snapped lines toward its preview line, and the Spline as a curve that a brush stroke can snap to. These examples describe documented assistant functions; choosing which one fits your drawing is your decision.
Use this controlled comparison:
- Select the Freehand Brush Tool and identify the assistant by its type label, not its color. Assistant color can help you spot a guide, but do not treat color as proof of its behavior.
- Keep the canvas, brush, stroke start and intended stroke end the same. First leave Snap to Assistants off and draw a perspective line, a curved mark, or a parallel line appropriate to your assistant. Note where the result falls relative to the guide.
- Change only Snap to Assistants in the Freehand Brush Tool options. Repeat the mark with the same intended endpoints, deliberately aiming the brush slightly away from the assistant.
- Compare the two marks on the canvas. If the second mark follows the guide while the first reflects your hand movement, snapping affected that freehand comparison. This is a proposed check, not a guarantee about every assistant or drawing tool.
Use a three-column acceptance worksheet
The following is a hypothetical worksheet for a perspective study. The observations are example data, not Krita test results or guaranteed outcomes. Record what you actually see in your document, then decide whether snapping is useful for that task.
| Mark | Guide position and type | Freehand result with snapping off | Repeat with snapping on | Decision for this drawing |
|---|---|---|---|---|
| Perspective line | Ruler guide slopes up toward the right | The line ends slightly below the guide at the far end | The repeat appears to follow the guide | Enable snapping when this edge must align |
| Arc | Spline guide bends around a hypothetical window | The mark misses the middle of the curve | The repeat appears closer to the spline | Keep snapping on for this curve, then inspect other marks separately |
| Parallel line | Parallel Ruler guide is placed across a hypothetical roof plane | The line angles away from the guide | The repeat appears parallel to the guide | Use snapping for this set only if the visual result suits the scene |
The useful result is not a particular number of pixels or a perfect line: the documentation does not specify a measurement threshold. It is a visible difference, or lack of one, under your chosen conditions.
Limits and what to try next
This comparison only establishes what you observed with the Freehand Brush Tool, the selected assistant and your current setup. Do not generalize it to other drawing tools or assistant configurations. The manual documents the toggle in the Freehand Brush Tool options; it does not say that every brush-related tool uses the same setting or responds identically.
If both marks look alike, check that you changed the Freehand Brush Tool option and repeated the same kind of mark near the assistant. Confirm the assistant type and its placement, then try a different deliberately offset stroke. If snapping appears to pull the stroke somewhere unexpected, turn it off and inspect which assistant is relevant to that mark before continuing. The documentation does not define a universal snapping range or promise that every visible guide constrains every stroke.
Quick questions
Can I leave an assistant visible without snapping? Yes. The manual distinguishes preview shapes from snapping and documents the toggle as the way to enable snapping for the Freehand Brush Tool.
Which assistant should I use for a curved stroke? The manual describes Spline as a cubic Bézier curve that a brush stroke can snap along. Whether it matches your intended curve depends on how you position it.
Does a successful freehand comparison prove other tools will snap too? No. It only gives evidence for the Freehand Brush Tool and assistant configuration you compared.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.