
In Unified Transform, move the pivot to the point that must stay registered and enable Scale under From pivot. If the object must retain its proportions, also enable Scale under Constrain. These controls solve different problems: where scaling is referenced and whether width and height stay proportional.
Key Takeaways
- The pivot is the circle with a cross and can be moved.
- From pivot controls the scaling reference; Constrain > Scale preserves aspect ratio.
- Use a scaling handle, not a shear or perspective handle.
Define the point that must remain aligned
Imagine a product cutout whose base must stay on a shelf line while you change its size for a commercial composition. Scaling without considering that registration point can require repeated repositioning afterward.
Work on a copy and choose a recognizable point on the object, such as the base center. Compare it with a stable feature in the surrounding layout. Make the chosen registration explicit before changing size; “looks roughly centered” is not a dependable acceptance condition.
If the object is already stretched, first address the GIMP aspect-ratio problem. Moving the pivot does not repair distorted proportions.
Separate the pivot from the constraint
Open Tools > Transform Tools > Unified transform, or use Shift + T. Click the image to show its transform controls.
The official Unified Transform guide identifies the pivot as a circle with a cross. Drag it to the chosen registration point. Pivot > Snap can help when the desired point is a center or corner; it is not the same setting as scaling from the pivot.
In Tool Options:
- Enable From pivot > Scale for scaling relative to that pivot.
- Enable Constrain > Scale if the object's aspect ratio must stay fixed.
- Drag a square scaling handle and observe both the registration point and the silhouette.
The tool also offers shear and perspective handles. Check the pointer's indicated action before dragging, because an incorrect handle can produce a different transformation even when the pivot is positioned correctly.
Check registration and shape independently
For the proposed shelf composition, the base point should remain aligned to the same shelf location while the object grows or shrinks around it. Check a circular or rectangular feature for unwanted shape change as a second condition.
If the object changes proportion but stays registered, inspect the scale constraint. If its shape is correct but its base drifts, inspect the pivot placement and From pivot setting. Changing both at once hides which control caused the symptom.
Also confirm that the transformation targets the intended layer. The layer versus whole-image scaling guide covers scope; a correctly positioned pivot cannot prevent unrelated layers from changing if the wrong target was selected.
Related tasks
- How to Preserve or Intentionally Change a Layer’s Aspect Ratio in GIMP
- Scale One GIMP Layer Without Resizing the Whole Image
- How Do I Move a Photo Inside a Photoshop Frame Without Moving the Frame?
Sources and scope
- Unified Transform: Unified Transform has a movable pivot; From pivot and Constrain are separate controls. Constrain > Scale preserves aspect ratio; the tool uses squares for scaling and different handles for shear and perspective.
Official documentation synthesis; no hands-on test, search-volume or measured citation-rate claim. Scenarios and diagnostic comparisons are proposed editorial examples, not reported experiments.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: AI-generated conceptual editorial illustration; not a real application screenshot, observed output or before-and-after test.