The direct answer is in GIMP’s Scale Layer dialog: keep the chain icon unbroken when Width and Height must retain their original ratio; click the chain to break it only when independent dimensions, and therefore possible distortion, are intentional. This command applies to one selected layer and its contents, not to the whole image. See the official Scale Layer documentation.
Decide and Apply
Use this sequence when a layer looks stretched, or when a brief specifies an exact target size:
- Select the layer whose pixels should change. Confirm that the task is about that layer, rather than the canvas or several layers.
- Open
Layer > Scale Layer…, or open the layer’s context menu and chooseScale Layer…. Read the original Width and Height shown in the dialog. - Calculate the source ratio as
original width ÷ original height. Enter one target dimension first. With the chain unbroken, check that GIMP adjusts the other dimension to preserve the ratio. - If the target requires a different ratio, click the chain so it is broken, then enter both dimensions deliberately. Treat this as a stretch, not as a neutral resize.
- Select an interpolation method and confirm only after checking whether the result meets the project’s quality requirement. Scaling changes pixels; enlargement cannot recreate details that were not present.
For a hypothetical 1200 × 800 layer, the ratio is 1.5. A linked target of 900 × 600 preserves that ratio. An unlinked target of 900 × 500 produces a 1.8 ratio, so circles, faces, letterforms, or other known geometry may visibly change. The numbers illustrate the decision; they are not a guarantee about any particular image.
Acceptance Worksheet
The following is an author-proposed comparison method, not a recorded software test. Duplicate the layer or document, and change only the chain state between candidates.
| Check | Hypothetical observation | Decision |
|---|---|---|
| Source size and ratio | 1200 × 800; 1.5 | Use as the reference |
| Candidate A | Chain linked; 900 × 600; ratio 1.5 | Accept for proportional resizing |
| Candidate B | Chain broken; 900 × 500; ratio 1.8 | Accept only if stretching is specified |
| Geometry check | A circular mark stays circular; B becomes visibly oval | Reject B when shape fidelity matters |
| Text or subject check | Letterforms or a face appear wider or narrower in B | Treat as distortion, not a display-size issue |
At the intended viewing size, compare a circular object, a straight-edged logo, and one recognizable subject feature. Use the target ratio and the brief as the acceptance rule, not the layer’s color or the apparent size of its boundary.
Limits and Next Steps
GIMP documents that interpolation calculates pixels when a layer is enlarged and removes pixels when it is reduced; it does not add missing image information. Repeated enlargement or a large enlargement may look softer, and the interpolation choice affects the result. These are quality limits, not fixes for a wrong ratio.
If the linked candidate has the correct ratio but still looks soft, review the target size and interpolation choice. If the unlinked candidate looks wrong, return to the original dimensions and restore the ratio rather than trying to sharpen away geometric distortion. If the dialog does not affect the intended content, recheck which single layer is selected; this command is documented as a single-layer operation. The dialog description supports these scope and ratio checks.
Three Quick Questions
Does linking prevent all quality loss?
No. It constrains the Width-to-Height relationship. Scaling still resamples pixels, so proportional scaling can also soften or lose detail.
Should I break the chain to make a square?
Only when a non-square source is meant to become square. Forcing 1000 × 1000 from a 1200 × 800 source changes the ratio and can distort the layer. Decide whether the requirement is a square output or an undistorted subject before entering dimensions.
Is this the same as changing the canvas size?
No. This command resizes one layer and its contents. A canvas or multi-layer layout decision is a separate task; do not use this ratio control as evidence that the entire image has been resized.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.