If you want a new layer mask to take over the transparency already in a GIMP layer without changing how the layer looks, choose Transfer layer's alpha channel. Choosing Layer's alpha channel also uses the existing alpha to initialize the mask, but leaves that alpha in place. The layer alpha and mask then both affect visibility, making partially transparent areas more transparent.
What the two choices do
A layer’s alpha channel stores per-pixel transparency. A layer mask also controls which parts of a layer are opaque, semi-transparent, or transparent. They are separate controls that can both affect the visible result.
With Layer's alpha channel, GIMP uses the alpha values to fill the mask and preserves the layer’s original alpha. With Transfer layer's alpha channel, GIMP fills the mask from that alpha and then resets the layer alpha to full opacity. This is a transfer, not a second copy left on the layer: the mask now carries the original transparency information.
If the aim is to keep the existing appearance while gaining an editable mask, transfer is the direct choice. Use the non-transfer option only when you deliberately want the original alpha and the new mask to combine.
Add the mask deliberately
For a cutout whose soft edges must remain unchanged while you prepare to edit them:
- Select the image layer in the Layers dialog. Open Layer → Mask → Add Layer Masks…, or use Add Layer Masks… from the layer’s context menu.
- In Initialize Layer Mask to, choose Transfer layer's alpha channel. Leave Invert Mask unchecked if you want transparent areas to stay transparent and opaque areas to stay opaque.
- Click Add. GIMP adds a mask thumbnail beside the layer thumbnail. The image should retain its prior appearance, while the layer alpha is reset to full opacity.
- Click the mask thumbnail before painting or editing the mask. The selected thumbnail indicates which component your edits target; selecting the image thumbnail instead targets the layer content.
- Compare the composite against its earlier appearance and inspect the mask thumbnail. The expected transfer result is that the layer alpha has been reset to full opacity; the cited documentation describes this result but does not specify a separate interface indicator for checking that state.
These are GIMP controls, not Imagild features. The steps describe the GIMP 3.0 documentation linked below.
Compare three pixel samples
The table is an author-created hypothetical model to illustrate the difference between retaining the layer alpha and transferring it to the mask. It assumes the mask uses the same normalized values as the source alpha, with white fully visible and black fully hidden, and uses simple multiplication as an explanatory model only. This is not a formula documented here as GIMP's exact compositing calculation, nor a measured GIMP result.
| Hypothetical pixel | Original alpha | Mask value after initialization | Layer alpha: final visibility | Transfer: final visibility |
|---|---|---|---|---|
| Fully opaque | 1.00 | 1.00 | 1.00 × 1.00 = 1.00 | 1.00 × 1.00 = 1.00 |
| Half-transparent | 0.50 | 0.50 | 0.50 × 0.50 = 0.25 | 1.00 × 0.50 = 0.50 |
| Fully transparent | 0.00 | 0.00 | 0.00 × 0.00 = 0.00 | 1.00 × 0.00 = 0.00 |
The difference is most visible in feathered edges: the hypothetical half-transparent pixel falls to 25% visibility with Layer's alpha channel, but remains at 50% with Transfer layer's alpha channel. Fully opaque and fully transparent samples do not distinguish the options in this example.
Check the result and recover
Accept the transfer when the composite retains the previous edge appearance and the mask thumbnail shows the former transparency pattern, with darker areas corresponding to less visibility. The documented expected layer-alpha state is full opacity, because Transfer resets that channel after initializing the mask; the cited documentation does not describe a separate interface indicator for independently checking it. The thumbnail is a diagnostic view of the mask, not a guarantee that every subtle edge is easy to judge at small size.
If the result looks more transparent than before, first check whether you chose Layer's alpha channel. If so, undo the mask addition and add it again using Transfer layer's alpha channel. Also check that Invert Mask was not enabled: inversion swaps the mask’s opaque and transparent areas, a different issue from alpha being applied twice. If the alpha state and mask thumbnail do not match the intended transfer, inspect the selected layer and active thumbnail before editing further.
A layer mask controls visibility; it does not reconstruct missing image detail or make a feathered edge sharper by itself. The documentation explains the initialization choices and the resulting mask thumbnail, but does not specify every display or compositing nuance for every project. Verify the actual composite in your document rather than treating the illustrative numbers as a measured outcome.
Common questions
Does Transfer erase the transparency information?
It removes that information from the layer’s alpha channel by resetting the channel to full opacity, but moves the information into the mask. The appearance is intended to remain unchanged, and visibility is then controlled by the mask rather than by the original alpha.
When would I choose Layer's alpha channel?
Choose it when you intentionally want the existing layer alpha to remain and also want a mask initialized from it. Expect semi-transparent pixels to become more transparent because both controls contribute to visibility.
What if I want the reverse of the current transparency?
Use Invert Mask in the Add Layer Masks dialog only when you want transparent and opaque mask areas swapped. It is not a way to preserve the original appearance during transfer. If you need the original transparency to remain unchanged, leave inversion off and select the transfer option.
Sources and scope
- GIMP 3.0: Add Layer Masks explains both alpha initialization choices, inversion, and the mask thumbnail.
- GIMP 3.0: Add Layer Masks also documents the Add Layer Masks command and where to open it.
The numeric table is a hypothetical illustration, not a report of a software test.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.