
Choose the lock according to what should remain sharp. In Final Cut Pro's Cinematic controls, AF Tracking Lock follows a selected subject where possible, while AF Lock holds a distance from the camera. A person moving toward the camera can leave a deliberately fixed focus distance.
Key Takeaways
- Following a subject and holding a scene distance are different intentions.
- Inspect later focus points that can end the hold.
- Review the whole movement rather than one sharp frame.
State the intended focus behavior
For a portrait film, you may want a walking person to stay sharp. For a staged reveal, you may want the person to move into and then out of a fixed focus plane. Neither choice is universally correct.
Write the desired behavior before changing controls. “Keep this person sharp” calls for a different approach from “keep this doorway's distance sharp.”
Choose the appropriate lock
Apple's Cinematic focus guide distinguishes AF Tracking Lock from AF Lock at a specific distance. After enabling Cinematic adjustments, select a frame where the relevant subject or distance is identifiable.
For subject tracking, place the playhead on the intended frame. In the viewer, click the current yellow focus brackets, or double-click a suggested subject's white frame. The indicator becomes AF Tracking Lock. It follows that subject if possible until the next focus point or the clip end. Click the center of the closed yellow frame to turn this lock off.
For a fixed distance, move the pointer to a scene point at that distance. Press and hold the mouse button, then release it to hold until the next manual focus point or clip end; this action overwrites subsequent automatic focus points. A single click instead holds until the next manual or automatic focus point, or clip end. Check the small yellow AF Lock control and the later Cinematic Editor points. A point outside the depth-of-field range is not brought into focus merely by locking it.
The guide also describes focus-point boundaries that can end a hold. Review the later points in the Cinematic Editor before concluding that a lock unexpectedly failed.
Check the movement and transition
Play through the entire action. Look at the subject's face, nearby objects and the moment another potential subject enters. Do not increase background blur merely to disguise an unintended focus switch.
In an illustrative doorway shot, a fixed-distance lock can keep the doorway sharp while a person moves through it. If the requirement is instead a consistently sharp face, that result fails the brief even though the lock behaves as designed.
Manual focus edits can alter automatic focus points, so inspect the revised sequence as a whole.
Verify the intended output
Export a short segment and inspect the focus behavior at the final viewing size. Confirm the movement and the transition into the next shot.
For an AI-generated shot with uncertain focus, first compare visible depth relationships. For final acceptance, compare output with the preview.
Source: Apple's Cinematic focus guide.
Related tasks
- Why Is My Edited Background Sharp Behind the Face but Blurry Beside It?
- Captions look correct in preview but move in the export: isolate a small render test
Sources and scope
- Apple: Adjust focus in Cinematic mode clips: AF Tracking Lock follows subject if possible; AF Lock holds a distance; focus points limit holds; manual changes may alter automatic points.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance, not a claim of hands-on testing or independent review. Report a correction.
Cover: Pignatta / Pixabay, Content License. The city photograph is an illustrative source asset; it does not show this application or a test result.