If a RAW looks darker after you select a camera maker’s ICC profile, the profile may need darktable’s unbreak input profile correction. The manual says this correction is frequently needed with manufacturer ICC profiles to avoid an overly dark result. It is not needed with darktable’s standard or enhanced color matrices. Compare the two input choices on the same RAW before compensating with exposure.
Identify which stage changed
The input color profile module interprets the source colors and converts them into darktable’s working color space. The output color profile controls the profile used for an exported image; it is not the control to investigate first when the change appears while developing a RAW. For a RAW, darktable normally uses a camera-specific standard or enhanced matrix unless you select another input profile. The enhanced matrix is designed to give a look closer to the camera maker’s rendering. See the input color profile manual.
Use this ordered comparison on one image:
- In darkroom, note the current input profile and whether unbreak input profile is active. Record the preview’s overall brightness and the visibility of representative shadows and highlights.
- Select the manufacturer ICC profile, keeping the RAW and other edits unchanged. Observe whether the darkening appears at this switch. This comparison is a diagnostic method, not a documented guarantee that only brightness will change.
- If the ICC version looks too dark, enable unbreak input profile and compare again. The manual describes it as a correction curve for certain input profiles; its gamma and shadow limit depend on the profile. Do not assume a particular setting fits every camera ICC.
- Switch back to a standard or enhanced matrix and compare. If using either matrix, do not leave the extra correction enabled on the assumption it is required for those matrices.
Acceptance worksheet
The following figures are a hypothetical record, not software test results or an expected darktable outcome. Use your own observations and state how you judged brightness, such as a consistent preview view and the same shadow area.
| RAW and input choice | Correction state | Hypothetical observation | Decision to record |
|---|---|---|---|
| Same RAW, standard matrix | Off | Reference preview; shadow detail judged visible | Keep as comparison baseline |
| Same RAW, maker ICC | Off | Preview appears darker than baseline | Check whether this ICC needs correction |
| Same RAW, maker ICC | On | Preview appears closer in brightness; color may also differ | Keep only if this is the preferred, usable rendering |
| Same RAW, enhanced matrix | Off | Preview differs from the ICC comparison | Record separately; do not transfer the ICC correction by default |
A useful handoff records the source type, selected input profile, correction state, and the observed before-and-after brightness. Add the standard-matrix comparison so another editor can distinguish an ICC-specific correction from a general edit.
Limits and next steps
The manual says correction is needed frequently, not universally, for manufacturer ICC profiles. It does not promise that enabling it will match a camera JPEG, restore clipped detail, or improve every image. If the corrected ICC still looks wrong, compare it with the standard matrix and enhanced matrix on the same RAW, then decide which rendering best suits the image. Avoid using a global exposure adjustment to hide a profile-specific difference until you have made that comparison.
The input-profile documentation also notes that some non-RAW images and DNG files may have an embedded ICC profile that darktable uses by default. Confirm the actual profile shown for the file rather than assuming every image follows the same RAW-camera-matrix path. The separate unbreak input profile manual explains the correction’s intended role and its boundary: standard and enhanced matrices do not require this extra processing.
Does unbreak input profile brighten every RAW?
No. The documented use is correcting certain input profiles, frequently manufacturer ICCs, not applying a universal brightness lift.
Should I enable it with an enhanced matrix?
The manual says the extra processing is not required for standard or enhanced matrices. Judge those choices without carrying over the ICC correction by default.
Is the output profile responsible for the dark preview?
Not the first place to look if the change appears when selecting an input profile during RAW development. Output profile controls the profile used for export.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.