A gesture or prop that stays visible after key release may be using a latched trigger rather than a hold-to-show control. Adobe Character Animator provides Latch so a trigger can remain active without holding its key. Inspect that state before shortening the artwork's timeline or deleting the prop to force it away.
Describe the intended control behavior
Decide whether the performer should hold a key for a temporary expression or tap a control for a sustained state. A hat worn throughout a scene and a brief pointing gesture may need different interaction. Neither behavior is universally correct; the problem is a mismatch between the configured control and the agreed performance.
Record the desired resting state too. If a smile ends, should the character return to neutral, another expression or no replacement at all? Without that decision, fixing persistence can create a different failure in which the face briefly loses its required artwork.
Inspect the trigger itself
Select the intended trigger in the Triggers panel and review its Latch setting and controlled layers. The visible object may be linked to more than one trigger, so a second active control can keep it showing after the first is released. Check ownership before assuming one checkbox explains every persistent image.
If the trigger belongs to a swap set, note its default and priority relationship. A latched alternative and the default resting artwork need a deliberate recovery path. Do not disable unrelated body or facial behaviors just to make one prop disappear; that broad change can damage the rest of the performance.
A proposed state-transition record
For a fictional presenter, compare a temporary eyebrow raise with a hat intended to remain on. This is an original control test, not an executed puppet session. Test the actual configuration and record what each event does instead of assuming every rig uses the same reset key.
| Event | Temporary expression intention | Sustained prop intention |
|---|---|---|
| Activate | Show the expression | Show the prop |
| Release | Return to approved rest | Keep the prop if latched |
| Next supported change | Enter the next requested state | Use the documented off or replacement route |
Include a repeated activation in the test and write the observed result. Verify the current rig's supported clearing or default-selection action before teaching it to a performer. A control legend that omits how to recover is incomplete even if activation works beautifully.
Record and replay the recovery
Create a short performance containing activation, release, a pause and the intended return. Watch the actual saved take rather than only live rehearsal. Check that the recovery occurs at the approved moment and that the next action begins with the expected face and props.
Keep the control legend with the external puppet so another performer does not mistake a sustained state for a stuck key. For an Imagild character plan, describe the desired expression duration and return in ordinary language; it does not configure Adobe's Latch option. Completion means the correct interaction and return have been demonstrated, while the original artwork remains intact. If the object is still visible with the intended trigger inactive, investigate another visibility owner rather than deleting the only approved source.