
A two-sided photo postcard can need different layout guides on its front and reverse. The front may reserve extra space below a landscape for a caption; the reverse may reserve a different area for a personal message and supplier-approved address layout. Adobe Express margin synchronization and Apply to all pages answer different questions. Neither supplies postal clearances or decides where a real address belongs.
Write the two page requirements first
For a constructed 150 × 100 mm souvenir card, assume the printer supplies a separate bleed template and approves these internal design guides: front top/left/right 6 mm and bottom 12 mm; reverse top/bottom 8 mm and left/right 10 mm. These invented values describe this exercise only. They are not universal safe areas, postal rules or a recommendation for a different printer.
The front's wider bottom guide holds the exact caption “North Quay at dusk.” The reverse's guides protect a short message and leave the supplier's separately supplied address arrangement intact. Keep the front artwork, reverse copy and actual production template visible as different requirements before changing the interface.
Enter the front values deliberately
Adobe's margin documentation describes separate controls for the four sides and a synchronization lock. Select the front page and inspect the current lock state. When independent side values are required, disengage synchronization and enter the intended sides individually. Read all four displayed values again after the final entry; a synchronized change may have altered more than the field you typed.
Check the actual caption against those guides. A margin guide does not move an image or guarantee that a long caption fits. If the words enter the artwork, adjust the editable caption block or composition deliberately. Do not shrink essential text simply to make the guide look tidy.
Treat Apply to all pages as a separate decision
Applying the front values to every page would copy a layout rule that the reverse was never approved to use. For this card, leave that action unused and configure the reverse independently. If the document later gains several identical fronts, decide which supported scope truly applies rather than assuming all pages share the same purpose.
| Review point | Assumed condition | Decision |
|---|---|---|
| Front values after editing | Bottom 12 mm; other sides 6 mm | Pass the entered-guide check |
| Caption position | Full approved wording fits above the bottom guide | Pass this text-placement check |
| Reverse after a proposed document-wide copy | Bottom changes from 8 to 12 mm and the message loses room | Reject that copy operation; restore reverse-specific guides |
| Bleed and address requirements | Governed by separate supplier material | Hold those approvals until checked independently |
Inspect the two exported sides together
Export a proof using the actual delivery route, reopen it and check page order, orientation and the complete caption/message. Compare each side with its own approved guide record. Screen guides may not be part of the delivered artwork, so judge the exported content rather than expecting the guides to appear on paper.
Imagild can supply a visual treatment for the front photograph; it does not establish the reverse message geometry. Retain the approved photo artwork, editable two-page layout and the supplier template. If the printer changes the trim or address arrangement, reopen both side-specific decisions instead of reusing an earlier Apply to all pages result as proof of compliance.
Sources and review limits
- Adobe Express custom margins — Four independent sides, synchronization lock and Apply to all pages.
Reviewed November 13, 2026. All worked records are constructed examples, not observed generation, application, printing or measurement results. Imagild provides visual artwork; the named external application and supplier control the finishing task. This manuscript remains offline.