
Siril's synthetic bias is a level in ADU, not automatically the number entered as a camera's Offset setting. Its expression must use the actual relationship for the camera and file representation. Copying another camera's multiplier can produce a syntactically valid expression with the wrong calibration level.
Identify the two numbers before connecting them
Record the camera model, capture settings and the format of the converted frames. Distinguish the acquisition application's offset setting from the pixel values measured in the bias frames.
The official synthetic-bias tutorial demonstrates different mappings for different cameras. Its numeric examples are examples, not a common standard. It also warns that a zero setting can introduce clipping that distorts the determination.
For a DSLR, do not assume that ISO independence observed for the tutorial's example applies to your model. Establish the relevant behavior for the actual equipment.
Establish a supported level rather than guessing
The tutorial documents converting a bias series with convert offset and exporting basic statistics with:
seqstat offset offset.csv basic
It uses the median to inspect the relation between acquisition settings and recorded levels. Keep each frame matched to its actual setting; sorting an unlabeled list later cannot recover that connection reliably.
If statistics are normalized floating values, the tutorial explains their conversion to the 16-bit ADU scale. Do not multiply a value already expressed in that scale again. This is a unit check for a calibration input, not a claim to measure camera performance.
A sample-averaging reference illustrates why a single unusual pixel is weak evidence for a representative level, although Photoshop's controls do not define Siril's statistics.
Enter the expression in the expected units
During flat calibration, Siril accepts an expression instead of a master-bias path. A constant uses the leading equals sign; a keyword-based expression also uses a dollar sign for its FITS keyword.
For commands, preserve the quoted expression syntax documented by Siril. Confirm that a required OFFSET or BLKLEVEL header is actually present before relying on it. This guide deliberately supplies no multiplier to paste into an unknown camera workflow.
The input remains an ADU level even when subsequent processing uses floating-point images.
Verify the limited correction being substituted
A uniform offset substitutes a level, not every spatial signal a calibration frame might contain. The tutorial identifies conditions such as significant amp glow or long, warm flat exposures that require additional consideration.
Inspect the prepared flat and the resulting calibrated photograph. Keep the camera-specific derivation with the project, separately from the optical flat-field requirement. No bias acquisition, statistics export or calibration was performed here.
Related tasks
- Why Does a Photoshop Color Reading Change with Every Pixel?
- Use Lightroom Flat-Field Correction with the Right Calibration Frame
Sources and scope
- Siril: Synthetic biases: Camera offset settings are not necessarily ADU levels. The tutorial uses convert and seqstat to establish a camera-specific relation, requires synthetic levels in ADU even for float processing, and explains expression tokens and required FITS offset keywords.
Official RawPedia and Siril documentation was opened and read on October 23, 2026 (Asia/Shanghai). The Siril calibration reference identifies version 1.4.4. All acquisition, processing and acceptance examples are proposed; no camera, RAW file, calibration sequence or command was tested. The cover is decorative.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Pignatta / Pixabay, Pixabay Content License. This is an illustrative source photograph, not an application screenshot or a generated test result.