To protect aligned voice and music while trimming the main picture in Shotcut, identify the picture track you intend to edit, make the voice and music tracks current only as needed for inspection, and use the track header's Lock control on A1 and A2 before trimming. Afterward, check the protected clips against their before-edit positions and alignment notes, then unlock only the tracks that must receive further edits. This is a track-level editing restriction, not a command that automatically preserves every cross-track relationship.
Decide and perform the edit
Shotcut's Timeline uses separate horizontal tracks for video and audio. The track header contains controls including Lock; the documentation describes locking as preventing edits to that track. The current track is a separate concept: it is shown with a gold background and acts as the target for operations that depend on a current track. Selecting a track or clip can change which track is current. Therefore, selecting A1 does not lock it, and making V1 current does not unlock or lock any other track.
Use this sequence when the main picture is on V1, optional graphics are on V2, narration is on A1, and music is on A2:
- Write down the intended edit: for example, shorten a pause in a V1 clip between
00:01:12and00:01:16. Record recognizable voice and music anchors near that area, such as the start of a sentence or a music hit, and note whether those anchors are meant to stay aligned with picture content whose timing will change. - Confirm that V1 is the intended edit track. Decide whether V2 graphics are also protected; do not assume that a visible overlay should move or remain fixed without checking its editorial purpose.
- Use the A1 and A2 track headers to choose Lock. Record their state in the worksheet below. Lock V2 as well only when its placement must not be edited.
- Trim the V1 clip by dragging its left or right edge. Avoid treating the gold current-track background as a lock indicator. If you use a ripple-related operation, record that separately; the lock control and ripple behavior answer different questions.
- After the trim, inspect A1 and A2 individually. Compare the recorded anchors and check that the clips remain at the intended times and still align with the approved picture relationship.
- Unlock only the track that is now intentionally editable. Leave the protected state documented until the next deliberate timeline decision.
Acceptance worksheet with a concrete hypothetical
The following is an author-proposed acceptance comparison, not a Shotcut test result or a promise about how an operation will behave. The times and observations are assumed data for deciding what to investigate.
| Track | Before state and anchor | Expected after V1 trim | Hypothetical observation | Decision |
|---|---|---|---|---|
| V1 picture | Current; cut at 00:01:12 | Only the planned picture edge changes | Edge shortened by 4 seconds | Accept picture edit |
| V2 graphic | Locked; title begins 00:01:14 | Remains editable-protected and reviewed | Title still begins at 00:01:14 | Keep locked |
| A1 voice | Locked; sentence starts 00:01:13 | Check whether the sentence must move or be edited to stay aligned with the revised picture; an unchanged start is acceptable only if the picture relationship is unchanged by design | Start reads 00:01:13; whether the revised picture still matches the sentence is not yet established | Do not accept alignment from the time anchor alone; resolve the intended picture/voice relationship first |
| A2 music | Locked; beat at 00:01:16 | Beat remains at the recorded position | Beat reads 00:01:16; no intended music edit recorded | Accept, then keep locked |
If the observation conflicts with the expected result, or the picture-to-audio relationship is not established, stop making compensating drags. First decide whether the revised picture is meant to retain the existing voice and music timing or whether audio must also be edited; then check whether the intended action was a trim, a ripple action, or another timeline operation, and whether the correct track headers were actually locked. The worksheet records an editorial requirement; it does not prove that Shotcut will reposition or preserve clips in a particular way.
Limits and next steps after failure
Locking protects the locked track from edits according to the documented track control. It does not decide which track is current, create synchronization metadata, repair an already misaligned recording, or establish whether a graphic should follow a picture change. It also does not make a locked track appropriate for every editing strategy: if narration must be shortened, unlock A1 deliberately and revise the worksheet.
If A1 or A2 appears to have changed, verify the visible lock state at the track header and identify the exact command used. Check the clip's time position and a meaningful audio or picture anchor rather than relying on the color of a selection outline. If the expected relationship cannot be explained, undo the immediate edit when appropriate and re-evaluate the timing decision before manually moving audio. Shotcut documents Split all (unlocked) tracks as a distinct shortcut behavior, so do not infer that every timeline command treats locked tracks identically; consult the operation you are using.
Three quick questions
Does selecting A1 protect it?
No. Selection or a gold current-track background identifies the current track; use the track header's Lock control for the protection decision.
Should I lock V2 too?
Lock V2 when its graphics must not be edited during this pass. If its relationship to the trimmed picture is intentionally supposed to change, document that choice instead of locking it automatically.
What does an unchanged waveform prove?
It is one observation about the clip. Compare its time anchor and its approved relationship to the picture; an unchanged-looking waveform alone does not establish that the whole timeline remains correct.
Sources: About the Timeline and Timeline: Selection and Groups.
Sources and next step
- About the Timeline - Documentation - English - Shotcut Forum
- Timeline > Selection and Groups - Documentation - English - Shotcut Forum
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the film workspace. The external software controls discussed above belong to their respective products.