
Use clip channel mapping to identify which source channels a Fairlight clip represents, and track format to define the destination track's layout. Those controls answer different questions. Trace a wrong source channel at the clip before compensating with a track pan control.
Key Takeaways
- Establish the microphone carried by each recorded channel.
- Separate source interpretation from track layout.
- Check every intended channel with an identifiable spoken cue.
Map the recording before rearranging it
A file may contain a useful microphone, a safety channel, a camera microphone, or several independent sources. Start with a channel inventory and listen to the original recording. Do not infer channel identity solely from waveform size: the louder channel may contain a different microphone or unwanted sound.
Blackmagic's Fairlight channel-mapping overview distinguishes clip mapping from track format. It identifies Clip Attributes as one route to clip format controls and the track header as a route to track-format controls. Confirm those locations against your installed Resolve interface.
Inspect the source and destination in order
- Save a project revision before changing audio interpretation.
- Audition source channels individually and name their actual content.
- Right-click the clip and open Clip Attributes. In its audio mapping controls, verify the source channel and clip format against the channel inventory before changing the track.
- Right-click the destination track header and choose the required track format from its format controls, such as mono for a separately interpreted mono microphone. This changes the destination layout; it does not select a different recorded source channel.
- Play the edit and inspect the resulting output path before changing mix levels.
Keep a note of what changed. If source assignment and destination layout are altered at once, it becomes harder to distinguish a fixed mapping from an accidental duplicate route.
Use two speaker identities in the check
For an illustrative interview, the first recorded channel contains the interviewer and the second contains the guest. Choose passages where each person speaks alone. After routing, verify that the channel or track named for the guest contains the guest rather than the interviewer or a blend of both.
A separate hypothetical failure has the correct guest source selected in Clip Attributes but the wrong destination format: the identity test passes, while the intended mono layout check fails. Keep that source mapping unchanged and correct the track format. Conversely, a correctly formatted mono track carrying the interviewer is still a source-mapping error.
Check source identity with each speaker alone, then inspect the destination layout and listen through its intended output. Also check simultaneous speech. A configuration that seems correct during isolated words can still combine microphones in a way the recipient did not request. Approval should cover speaker identity, separation, and intended output layout, rather than only whether both people are audible somewhere.
Avoid using loudness to hide a mapping fault
Raising gain may make a faint unintended channel audible without selecting the correct source. Pan position describes where a signal is heard; it does not identify what the recording channel contains.
The two-microphone separation guide illustrates the source problem through Premiere. For a listener-facing failure, compare the one-ear narration check. Fairlight's source-versus-track investigation is distinct from claiming that every one-ear fault has the same cause.
Related tasks
- How Do I Edit Two Microphones Recorded on One Stereo Clip Separately in Premiere?
- Why Do Our Wedding Vows Play in Only One Ear?
Sources and scope
- Blackmagic Design: DaVinci Resolve Fairlight: Clip and track mapping are distinct; clip format via Clip Attributes and track format via header; separate mono-track workflows.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance, not a claim of hands-on testing or independent review. Report a correction.
Cover: Pignatta / Pixabay, Content License. The city photograph is an illustrative source asset; it does not show this application or a test result.