
REAPER spectral peaks color the waveform according to frequency content, particularly the dominant frequency as it changes over time. They help locate events worth listening to; they do not display every simultaneous frequency as a full spectrogram would, and their display controls do not necessarily change the sound.
Key Takeaways
- Treat color as a diagnostic cue with a known configuration.
- Do not infer that an absent color proves a frequency is absent.
- Display Gain changes the shown peaks, not playback volume.
Enable the display without changing the recording
The REAPER 7.81 manual, section 7.38, documents Options > Peak display mode > Show spectral peaks. Normal peaks returns to the ordinary display. View > Peaks Display Settings opens the related controls.
For a hypothetical voice recording, choose a short passage containing the suspected event and listen before drawing conclusions from its color. Keep the source intact; changing this view is not a repair operation.
Read the color according to the actual configuration
The guide describes frequency-dependent coloring, especially the dominant frequency over time. A colored transient can point to a useful inspection location, but the display does not establish that other frequencies are absent from the same moment.
The color mapping can be customized. Do not assign a universal frequency meaning to a screenshot's hue without knowing its settings. This matters when two editors compare captures from different installations.
Separate taller peaks from louder audio
The Peaks Display Settings include Display Gain for peak height. The manual states that this control does not change audio volume. Record whether a comparison changed display gain or actual processing before interpreting a taller waveform as an altered recording.
This display-only distinction cannot certify clipping, intelligibility or delivery loudness. Those properties need their own signal and listening checks.
Choose a fuller analysis for a different question
If the question concerns overlapping frequencies, consult a spectrogram rather than expecting one dominant-color cue to represent the complete mixture. The spectrogram window guide explains a different time/frequency resolution decision.
An averaged spectrum comparison answers another question and requires matched channel scope. Use spectral peaks to locate the relevant time, then choose the analysis that actually supports the claim.
Accept the view as a navigation aid when its settings are known and the audible event has been verified. This guide reports no executed analysis, measured frequency or repaired recording.
Related tasks
- Why Does an Audacity Spectrogram Show Clear Hum but Blur a Short Click?
- Why Does Audacity Plot Spectrum Change When I Select Both Stereo Channels?
Sources and scope
- REAPER User Guide 7.81: Sections 7.38 pp152–154: dominant-frequency colored peaks; Options Peak display mode Show spectral peaks/Normal; View Peaks Display Settings; Display Gain affects height not audio; configurable colors; not equivalent spectrogram.
Based on the official REAPER 7.81 user guide downloaded on October 23, 2026. Examples and acceptance checks are proposed procedures; no application execution, listening test or measured result is claimed.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: William Liu / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.