
REAPER can record audio during pre-roll, but hearing a count-in does not by itself establish that the early words were captured. The 7.81 manual requires the Audio > Recording preference to record audio during pre-roll plus the documented metronome recording options. After the take finishes, drag the recorded item's left edge leftward to reveal the retained lead-in.
Key Takeaways
- Pre-roll playback and recording during pre-roll are different decisions.
- Enable the recording preference before the take.
- Extending an item's edge reveals captured audio; it cannot recover words never recorded.
Separate preparation time from retained audio
A narrator may begin a breath or word before the intended entry. A count-in gives preparation time, while the additional recording preference determines whether audio during the pre-roll is retained.
Section 3.8 describes count-in measures and separate playback/recording choices. Do not assume every sound heard while waiting for the nominal recording point is already part of the visible item.
For a proposed test, retain the original project and choose a disposable track with the intended microphone input. This guide has not captured a test phrase.
Configure the documented capture path
Open Preferences > Audio > Recording and enable the preference to record audio during pre-roll.
Open Options > Metronome/pre-roll settings, or the metronome button's context settings. Under the manual's recording-during-pre-roll instructions, enable the metronome, Run metronome during recording and Pre-roll before recording.
Confirm the intended pre-roll duration and the armed track before the test. Route and monitor the session appropriately; this procedure does not certify that a click cannot leak through a microphone or an unintended input.
Reveal the recorded lead-in afterward
Start the test and deliberately include an identifiable sound during the pre-roll. Finish recording. The manual then instructs dragging the recorded item's left edge to the left to reveal what was recorded.
Inspect the newly exposed extent and listen for the test sound. A successful edge extension alone is insufficient: confirm that the wanted source and full leading syllable exist there. If the preference was disabled before capture, do not promise that trimming can recreate absent samples.
Preserve the recording operation's scope
This is different from Audacity Punch and Roll, whose selection-left-edge continuation can replace later audio. Here the distinct operation is retaining and revealing pre-start material.
The recovered extent still needs ordinary narration join and room-tone review. Choose the appropriate visible start after inspection; the earliest available sample is not automatically the best edit point. Accept only a complete, correctly sourced entry with the intended later material intact.
Related tasks
- Why Did Audacity Punch and Roll Replace Everything After My Selection?
- How Do I Record One Replacement Sentence That Does Not Sound Pasted In?
Sources and scope
- REAPER User Guide 7.81: Section3.8 p62 Recording during audio pre-roll: Audio Recording preference to record audio during pre-roll; enable metronome, Run during recording, Pre-roll before recording; drag item left edge left after finish to reveal recording. p61 count-in precedes recording.
Guidance based on the verified official REAPER 7.81 manual, read on October 23, 2026. The recording, processing and device comparisons described here are proposed checks; no remote connection, listening result or performance measurement has been performed.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Mak Cézar / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.