
ReaXComp's bands divide the frequency spectrum into adjacent regions. Their boundaries are shared: the REAPER 7.81 manual explicitly says that changing Band 1's upper frequency to 250 Hz also makes 250 Hz the beginning of Band 2. Moving that edge changes which neighboring compressor receives frequencies near the split; it does not create two independently overlapping cutoffs.
Key Takeaways
- Adjacent bands share a crossover boundary.
- A boundary change reallocates frequencies before their compression is judged.
- Compare dynamics and compensation gain separately from an apparent increase in loudness.
Understand the partition
Section 16.13 documents four default regions: below 200 Hz, 200–1,000 Hz, 1,000–5,000 Hz and above 5,000 Hz. Bands can be added or deleted and their boundaries changed. These are documented starting values, not recommended settings for every narration.
For a hypothetical film voice, a low-frequency disturbance may need different dynamic treatment from upper speech detail. Define the audible problem before dividing the track into numerous narrow bands. The manual warns that too many independently compressed bands can sound disjointed.
Make one shared-boundary comparison
Keep an untreated reference and a retained starting configuration. Identify the two neighboring bands and note their common boundary. Change the first band's upper frequency while observing the next band's starting frequency.
The manual's 250 Hz example illustrates the linkage; it is not a calibrated correction for a particular speaker. Moving the crossover changes the material entering both regions, even if their individual compression controls stay unchanged.
Repeat the same passage and include both the problem sound and ordinary speech. Do not compare unrelated words and attribute all differences to the boundary.
Then judge per-band dynamics
ReaXComp applies different compression to different frequency bands. Attack and release affect when that processing engages and relaxes. Inspect those controls in the affected bands after establishing the intended partition.
Use gain cautiously to compensate for compression rather than assuming a louder result is better. The compressor pumping guide addresses a full-band breathing-noise problem; the present diagnosis first concerns which spectral region receives each processor.
Keep the task distinct from de-essing
The manual lists narrow-frequency vocal processing as another application, including de-essing or de-popping. That possibility does not identify the cause of every harsh syllable. The sibilance review guide supplies separate word-intelligibility checks.
No processing comparison has been executed here. Accept a revised partition only when both neighboring regions behave appropriately through the complete passage and the voice remains coherent in the final mix.
Related tasks
- Why Does Background Noise Swell Between Words After Voice Compression?
- How Do I Soften Harsh S Sounds Without Giving My Narration a Lisp?
Sources and scope
- REAPER User Guide 7.81: Sections16.13 pp334–335: independent compression by frequency band; four default bands; adding/deleting bands; increasing band1 top to250Hz also starts band2 there; attack/release/gain and specific-band vocal applications.
Guidance based on the verified official REAPER 7.81 manual, read on October 23, 2026. The recording, processing and device comparisons described here are proposed checks; no remote connection, listening result or performance measurement has been performed.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Mak Cézar / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.