
ReaVoice uses a recorded vocal together with MIDI control to create pitch-shift harmonies. A track containing note events but no intended source audio is not the same setup. Establish the vocal's audio receive and the MIDI events as two separate inputs before changing the harmony settings.
Key Takeaways
- The recorded performance supplies audio; MIDI supplies musical control.
- Loading a MIDI item does not select the vocal source automatically.
- Preserve the original and review generated harmony against it.
Identify the two input roles
For a hypothetical animated musical scene, keep the authorized recorded line on its source track. Create another track for the harmony operation rather than replacing the only recording.
Write down which audio performance should feed ReaVoice and which note events should control it. The MIDI part is not a transcript, a voice-identity reference or another recording of the words. A timbre-reference brief serves a different purpose.
Supply the recorded vocal to the harmony track
Section 13.43 of the REAPER 7.81 manual begins with a recorded vocal, a new track and a send from the vocal to that track. It recommends Pre FX initially. Its worked example uses an audio receive on channels 1/2 and inserts ReaVoice in the receiving track's FX chain.
Inspect that actual audio relationship. Renaming a track after the singer or placing it underneath the recording does not create the send. Keep other routes understandable while diagnosing the intended source.
This guide does not prescribe a universal wet/dry setting, voice count or musical interval. Those choices need the actual arrangement and installed plug-in controls.
Add the musical control deliberately
The documented live route arms the receiving track, selects a MIDI keyboard input and enables monitoring. If no hardware keyboard is available, the manual permits the virtual keyboard or notes entered through the MIDI Editor.
Work on a short passage first. Place or play note events where the harmony is intended and listen to their relationship with the recorded phrase. Refine them in the MIDI Editor as necessary. Note events alone do not demonstrate that the intended vocal reached the processor.
Review the resulting voices
Compare the source and the harmony separately, then together with picture. Check phrase beginnings, sustained parts and the ending. Do not correct a wrong note by changing the source's sample-rate interpretation; that pitch-and-duration problem is a different operation.
No harmony has been generated here. Accept the setup only when both input roles are correct and the musical result is approved, without describing the processed voice as a newly recovered original performance.
Related tasks
- Why Did My Narration Become Faster and Higher-Pitched After Import?
- How Do I Reference a Voice Without Copying the Sample’s Old Dialogue?
Sources and scope
- REAPER User Guide 7.81: Section13.43 pages274–275: recorded vocal sends audio, initially PreFX, to new track with ReaVoice; MIDI keyboard input and monitoring or virtualkeyboard/manual MIDI editor supply notes; example receives Audio1/2; multiple passes/editing permitted; output pitch-shift harmonies.
Documentation-based guidance from the verified official REAPER 7.81 manual, read on October 23, 2026. Proposed diagnostic projects, creative sound examples and external-device checks have not been executed; no recovery, latency, compatibility or listening result is claimed.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: William Liu / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.