
Use ReaTune > Manual Correction when the intended operation is a drawn correction for a specific pitch segment. REAPER's manual distinguishes this from Automatic pitch correction, which uses the selected algorithm, parameter and key. Neither procedure should be confused with changing sample-rate interpretation or fitting a narration to a shorter interval.
Key Takeaways
- Choose manual correction for explicit drawn segments.
- Delete a selected correction line to revise it; Clear affects the whole display.
- Review the performance before treating a corrected pitch as an approved voice.
Define the creative scope first
For a hypothetical sung tag in a short film, identify the intended note and the exact phrase that needs attention. Keep the source take and an untreated listening reference. Ordinary spoken narration does not automatically need musical pitch quantization.
A take that becomes faster and higher throughout may have an incorrect sample-rate interpretation. Resolve that input problem before drawing compensating corrections onto otherwise misinterpreted audio.
This workflow has not been tested on a recording and does not establish a particular voice's intended melody.
Open the manual correction controls
Insert ReaTune in the track's FX chain and select Manual Correction. Enable Manual pitch correction. Section 10.6 of the REAPER 7.81 guide lists Update, Prevent octave shifts and Prevent overlapping segments among the available options; inspect their state for the intended edit.
The documented editing action is to click and drag with the mouse to draw corrections. Begin with the identified segment rather than drawing across an entire line merely because its displayed pitch fluctuates. Pitch movement can belong to the performance.
To remove one correction, select its line and press Delete. The Clear button clears the entire display, so it is a broader reset than deleting the selected line.
Compare the alternate automatic contract
The separate Correction page supports Automatic pitch correction, a selected algorithm and parameter, and a specified key. Use that when the approved creative intention is key-based processing rather than a few explicitly placed correction lines.
Do not interpret choosing a key as proof that every syllable should land on one of its notes. The cited manual provides controls, not an artistic prescription or an artifact-free guarantee.
Approve sound and timing separately
Listen to corrected entries, transitions and sustained parts at a comparable level to the untreated take. Keep intentional slides and expression where required, and reject abrupt or distracting changes.
If the actual problem is fitting narration duration while preserving pitch, use that separate timing workflow. Accept this edit only when the intended local pitch decision and the complete performance both survive review.
Related tasks
- Can I Fit a 22-Second Narration into 20 Seconds Without Raising the Voice?
- Why Did My Narration Become Faster and Higher-Pitched After Import?
Sources and scope
- REAPER User Guide 7.81: Section10.6: Correction automatic option plus algorithm/parameter/key; Manual Correction enables manual mode, Update/Prevent octave shifts/Prevent overlapping segments options; click-drag corrections, selected line Delete, Clear clears entire display.
Guidance based on the verified official REAPER 7.81 manual, read on October 23, 2026. The recording, processing and device comparisons described here are proposed checks; no remote connection, listening result or performance measurement has been performed.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Mak Cézar / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.