
REAPER Track input FX process the incoming material as it is recorded. Their effect becomes part of the recorded media. Removing the processor afterward does not recreate the dry signal if a dry version was never retained separately.
Key Takeaways
- Identify the input FX chain separately from the ordinary track FX chain.
- Audition record-time processing before committing a take.
- Monitoring a signal and writing a new recording are different operations.
Locate the stage that owns the processing
For a hypothetical narration take, distinguish an effect applied after recording from one printed during capture. The REAPER 7.81 guide, section 3.26, explicitly describes input FX as destructive processing of the recorded media.
A familiar plug-in name does not reveal which chain contains it. Inspect the track's input processing before assuming that deleting a visible playback effect will reveal an untreated take.
Audition the actual record-time chain
The documented route is to arm the track, choose its input, right-click Record Arm and open Track input FX chain. Add only the intended processing and review its settings. The manual notes that input FX use resources while the track is armed.
With input monitoring enabled, audition the live material and the effects before recording. For a rehearsal without creating recorded media, the guide separately documents Record disable (input monitoring only) from the Record Arm context menu. Restore the required record mode deliberately before a real take.
Decide whether a dry version is required
If later editors may reject the treatment, plan an independently retained dry source through a supported recording arrangement. This guide does not invent a one-click simultaneous dry-and-wet routing preset or claim an existing take contains both.
The convolution-room guide discusses designing a room around dry narration. That flexibility depends on actually retaining suitable source audio.
Inspect the file rather than the current plug-in list
On a disposable test take, record a short recognizable phrase, then inspect the saved media's sound independently of the later playback chain. Compare against the documented recording setup. This is a proposed test, not a recording already performed.
A high-bit-depth file does not prove that unwanted processing can be reversed. The 32-bit-float boundary guide explains another reason to distinguish stored information from a format label.
Accept when the recorded treatment is intentional and any promised dry source is independently verified. Do not describe newly reconstructed speech as the recovered original dry take.
Related tasks
- How Do I Make Dry Narration Belong in a Fictional Hall Without Adding Obvious Echo?
- Can a 32-Bit Float Recording Recover Every Distorted Shout?
Sources and scope
- REAPER User Guide 7.81: Section3.26 explicit Track input FX chain context RecordArm, processors applied destructively to recorded media, only resource whilearmed; section3.27 Record disable input monitoring only no record.
Based on the official REAPER 7.81 user guide downloaded on October 23, 2026. Proposed checks have not been executed; no recording, crash-containment test or measured result is claimed.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: William Liu / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.