
Inspect the vector mask's Density and Feathering before redrawing a path that already matches the intended outline. Adobe separates path geometry from mask opacity and edge softness in Mask layers with vector masks. A correct outline can coexist with a masking property that does not match the required result.
Key Takeaways
- Check the vector mask is enabled before editing its shape.
- Evaluate Density and Feathering independently.
- A clean path does not prove a raster export is fully opaque or transparent where intended.
Restore the mask before changing its path
Select the affected layer in Layers and its Vector Mask control in Properties. If the vector-mask thumbnail has a red X, choose Layer > Vector Mask > Enable, or Shift-click that thumbnail to re-enable it. Confirm that the X disappears and the mask again controls the layer; moving path points while the mask is disabled cannot fix that state.
Use a duplicate working layer for a proposed single-variable comparison. Keep the path unchanged and vary Density: reduced mask opacity can let previously masked layer content show through, while restoring full mask density restores the intended hiding. Compare the outside of the path against the background. Then leave Density fixed and vary Feathering to examine edge softness separately. Accept only when the intended outside region stays hidden and the border has the required sharpness; do not redraw the outline to compensate for an opacity or disabled-mask state.
Define the expected boundary
For a hypothetical product card, the intended result is a crisp geometric window with no visible photograph outside it. Keep the source image and vector mask editable.
Inspect the path at a useful magnification. If the path itself follows the correct window, record that observation before changing anchors. If it has shifted away from the photo, diagnose mask linkage and movement separately.
Do not convert the vector mask into pixels just to expose familiar controls. The selection-to-path guide explains why geometry and soft visibility information are not interchangeable.
Check state and properties
Select the layer and its Vector Mask in Properties. Confirm the mask is enabled; Adobe documents a red X when it is disabled and that unmasked content then appears.
Inspect Density, which controls mask opacity, separately from Feathering, which softens the boundary. On a saved working copy, change one relevant property at a time and compare the outside region and edge.
The useful question is not whether a slider moved. It is whether the intended hidden region is concealed and whether the transition has the required sharpness. An intentionally soft vignette and a precise product window have different acceptance criteria.
Review the composite and exported copy
Place contrasting temporary backgrounds behind the masked layer in the working proof. Compare both a bright and dark background so faint residual content is easier to notice. This is a proposed visual test, not a claim of a numeric transparency measurement.
Export to a format appropriate for the required transparency and inspect that file separately. Check the outside region, the boundary, and any thin product detail touching it.
Keep the geometric master with the handoff. This guide addresses documented mask controls, not every possible cause of a halo or rectangle. A second visible layer, a style effect, or the destination's background may require a separate diagnosis once the vector mask itself has been verified.
Related tasks
- Why Does a Feathered Photoshop Selection Become a Hard Path?
- Why Does a Photoshop Cutout Move Away from Its Mask?
Sources and scope
- Adobe: Mask layers with vector masks: Vector masks use paths; Density controls mask opacity, Feathering softens edges, and a disabled mask shows a red X and unmasked content.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance, not a claim of hands-on testing or independent review. Report a correction.
Cover: Pignatta / Pixabay, Content License. The city photograph is an illustrative source asset; it does not show this application or a test result.