
A smaller Photoroom Batch export can result from the export route rather than from a mistake in the picture. Check the source, design dimensions, platform, and Batch limit as separate conditions. Photoroom's official export-resolution table distinguishes individual and Batch output across platforms and plans.
Check four things
- The detail in the imported source.
- The design's width and height in pixels.
- The exact platform and export mode.
- The downloaded file's actual dimensions.
Compare the same photograph through both routes
Start with one authorized product photo whose original file you can inspect. Note its pixel dimensions and a small identifying feature, such as fine lettering on a label. Keep the composition and product scale the same when comparing a single-image workflow with Batch.
A comparison that changes the template, crop, background, and image size together cannot isolate the export restriction. If the existing Batch contains mixed layouts, first choose one representative image and document its settings. You can investigate the remaining images after the cause is clearer.
Use the actual downloaded files for comparison. A sharp-looking preview is useful for editing but does not establish the dimensions of the delivery file.
Read the table for your platform and mode
Identify whether you used iOS, Android, or the web application, and whether you exported an individual design or a Batch. Check the current table under that combination. Do not carry a maximum from a different platform into your delivery promise.
Also distinguish a design's canvas from the export ceiling. A larger canvas may be reduced on export under the route's applicable limit. On some documented routes an image-quality setting matters as well. Record the visible setting instead of assuming a subscription name alone describes the output.
The table is changeable product documentation. This guide intentionally does not turn one listed maximum into a permanent cross-platform rule.
Separate a smaller file from a soft subject
A file can have the expected overall dimensions while its product still looks soft. If the original product occupies only a small portion of a large design, the surrounding background does not add detail to the label or stitching. Compare the product at the intended final display size, not only the width of the entire image.
Photoroom's photo-size explanation discusses templates and resizing. Enlarging an existing small source is a different task from obtaining a larger export. Neither action proves that tiny product text has become accurate.
| Observation | Investigate next |
|---|---|
| Output dimensions are lower only in Batch | Applicable Batch ceiling and export settings |
| Both outputs are small | Design size and platform limit |
| Dimensions are large but the product is soft | Source detail and subject size within the design |
| Only some Batch items differ | Their individual layout and source conditions |
Choose the delivery route after the comparison
If the current Batch ceiling is below a client's requirement, assess a supported individual export route before changing every source. If the source itself lacks detail, obtain a better source or agree on a smaller use. Do not buy a plan on the assumption that it removes every quality limitation.
For print, translate the required physical dimensions into an appropriate pixel requirement; see photo pixels and print size. If only part of the Batch needs revision, review the separate guide to Batch editing scope. After acceptance, retain the actual files, since a Batch export and a saved design are different records.
These are documentation-based diagnostic steps, not reported test results. Record your platform and exact output before treating a limit as the explanation for your file.
Related tasks
- Photoroom Batch: When to Use the Side Menu, an Image Pill, or Copy/Paste Edits
- Why a Photoroom Batch Is Not the Same as a Saved Design
- How Large Can You Print a Generated Image?
Sources and scope
- Source: Image resolution limits for exports: Export dimensions depend on canvas, platform, plan, and Batch mode. The current official table has separate Batch limits; enlarging the design does not restore source detail.
- How image size can affect sharpness: Photoroom explains design dimensions, templates, resizing, and the distinction between pixel detail and apparent display size.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance, not a claim of hands-on testing or independent review. Report a correction.
Cover: Pignatta / Pixabay, Content License. The city photograph is an illustrative source asset; it does not show this application or a test result.