
Photopea redraws its rulers relative to the selected artboard, with zero at that artboard's upper-left corner. Guides added while an artboard is selected belong to that artboard and can disappear when you select another. A changed ruler origin or hidden local guide does not, by itself, mean the document geometry moved.
Select the artboard before interpreting a measurement
An artboard is a top-level layer folder with a rectangular viewing region and its own background. The relevant coordinate reference is therefore more specific than the overall arrangement of boards on the workspace.
Photopea's Artboards documentation connects artboard selection with both ruler redraw and guide ownership. Start in the Layers panel and identify the actual artboard you intend to measure, rather than inferring selection from the area your pointer last crossed.
For a hypothetical pair of product cards, an element at the same local horizontal position on each board should be compared using each board's local ruler. The physical distance between the boards on the workspace is a different measurement.
Check local guides with a selection round trip
Use an uncomplicated document containing two artboards. This is a suggested diagnostic exercise, not a reported software test.
- Select the first artboard and note the ruler's zero point.
- Add a guide needed for that artboard's layout.
- Select the second artboard and inspect both the ruler origin and guide visibility.
- Reselect the first artboard and inspect its guide again.
If the guide follows its owner in this comparison, do not redraw a second copy merely because it was hidden during the other selection. Duplicate guides can make a later alignment check confusing.
If the expected guide still cannot be found, inspect which artboard was selected when you created it. A description such as the left board is less reliable after boards have been moved or renamed.
Keep board dimensions separate from local placement
With the intended artboard selected, Window > Properties exposes dimensions and background settings. Those properties describe the board; they do not replace checking the position of the artwork inside it.
For an SVG supplied as part of a layout, viewport clipping is another boundary to inspect. An asset can have its own cropped contents before it reaches the artboard, so a board guide cannot diagnose every apparent missing edge.
Inspect the output rather than trusting workspace spacing
When exporting PNG or JPG variants, Photopea's As Artboards option creates an archive with an image for each board. Open the intended outputs and compare the element's clearance from the real image edge. Do not use the gap between artboards on the workspace as the image margin.
Retain the board-based PSD as the editable master rather than only its flattened renditions. The useful sign-off is that the correct board was measured, its own guide was used and the exported variant preserves the approved local placement.
Related tasks
- Export an Embedded Smart Object Without Exporting the Whole Poster
- Why Can I Edit My Saved Layers but Not Undo Yesterday’s Steps?
- What Is the Difference Between an Editable Artwork Master and a Flat PNG?
Sources and scope
- Photopea - Artboards: Selecting an artboard redraws rulers relative to it, and guides belong to the selected artboard and hide when another is selected.
Based on official Photopea documentation read on October 23, 2026 (Asia/Shanghai). The examples and acceptance procedures are proposed editorial guidance, not hands-on software tests. Browser support and current controls should be verified in the intended environment.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Rumeyda Tutak / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.