
In OpenToonz Level Strip, use Paste Into to overwrite selected drawing contents without inserting a new run of frame numbers. Ordinary Paste inserts drawings, using an available numbering gap first and then shifting and renumbering following drawings as needed. Confirm the source and destination counts first: an overwrite is a content change, not a harmless timeline paste.
Key Takeaways
- Level Strip Paste inserts; Paste Into replaces selected drawings.
- Source and destination selection counts affect what gets replaced.
- Review every scene exposure that uses the destination drawings.
Protect the numbered drawing contract
The OpenToonz 1.7.1 level-editing guide documents the different paste operations in Level Strip. This guide concerns drawings within a level, not copying a block of Xsheet timing cells.
Save a separate level copy before replacement. Record the destination drawing numbers and where they appear in the scene. If several scene cells use one destination drawing, replacing its artwork affects those uses too. A corrected thumbnail alone does not show whether the right exposures changed.
Match selections to the intended replacement
Copy the source drawings, then select the drawings whose contents should be replaced in the destination Level Strip. Use Edit > Paste Into, also available from the Level Strip context menu, and inspect the result. The manual describes the selection-count behavior; excess copied drawings are ignored when fewer destination frames are selected, while excess destination selections are left unchanged when the copied set is smaller.
Do not rely on an unexamined count mismatch to create a partial replacement. For a precise revision, choose matching source and destination sets and record their order. Use ordinary Paste only when insertion and the resulting numbering change are actually intended.
Proposed example: corrected hand drawings
Suppose approved timing refers to hand drawings 4, 5 and 6, but all three need a line correction. Preserve the original level, copy the three corrected drawings and use Paste Into on those three destinations.
Inspect the drawing numbers before and after. Then visit each affected scene exposure and check the hand shape. This is a proposed workflow; it does not claim a supplied level has been replaced or that every external clipboard format is compatible.
Verify numbering and visible content separately
Accept when the targeted numbers contain the intended corrected art, unselected drawings remain unchanged and the scene still uses the intended timing. Check a drawing immediately after the replacement range as a guard against accidental insertion.
If subsequent numbers shifted, stop and compare the operation with the saved copy. Do not repair a mistaken insertion by hurriedly renumbering the entire level. Return to the preserved state and choose the operation that matches the content-replacement task.
Related tasks
- Why Does Paste Insert Put My Premiere Clip on the Wrong Track?
- Why Does a Layer Jump to the Center When I Paste It Into Another Photoshop File?
- Editing One Nested Intro Changes Every Copy: Is the Source Sequence Shared?
Sources and scope
- OpenToonz1.7.1 official documentation: Paste shifts and renumbers; Paste Into overwrites selected frames and ignores excess source frames.
Based on the OpenToonz 1.7.1 published manual, including saved official full-body capture read on 2026-10-23. Later releases are not assumed equivalent. Examples and acceptance checks are proposed editorial procedures, not executed software tests. No measured query frequency or AI citation frequency.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Paparazzi Ratzfatzzi / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.