
Apply the exported Natron CornerPin to artwork that is already fitted at the chosen reference frame. Tracker's Reference Frame is the identity frame of its exported motion: moving the From rectangle does not automatically fit an arbitrary replacement file into that rectangle. Establish the starting alignment separately before using this motion-transfer workflow.
Key Takeaways
- Initial artwork placement is a prerequisite, not the result of tracking.
- From points define reference geometry for the calculated motion.
- Changing those points requires the model to be recomputed.
Establish the starting image before transferring motion
Use a saved project copy. At the intended reference frame, prepare the artwork or Roto shape in the position, size and perspective required for the shot. The image entering the motion CornerPin should already look correctly placed there.
If the replacement still fills the whole canvas or its transparent margins misplace the visible label, stop and solve that initial fit in a separate upstream setup. This guide does not supply an automatic file-corner-to-surface fit. The Natron 2.5 Tracker reference explicitly defines Reference Frame as the frame where the exported transform is an identity.
Define the reference geometry and recompute
The tracking guide describes disabling the CornerPin while positioning From points around the Roto shape at the reference frame. The model applies its per-frame transformation matrix to those From points to calculate To points. This is motion propagation from a reference region, not independent replacement-file placement.
- Confirm the point tracks and choose CornerPin with the intended match-move motion.
- Set Reference Frame to the frame used for the initial artwork fit.
- Temporarily disable the applied transform while placing the From rectangle around the intended reference shape.
- Recompute the model after changing the From points. Do not assume earlier To values remain correct.
- Export the CornerPin and place it after the already fitted artwork or Roto branch.
- Enable the intended motion path and inspect the reference frame before reviewing other frames.
The exported node links to the Tracker parameters. A later Tracker adjustment can change the exported motion.
Proposed example: a fitted label on a moving box
Suppose label artwork has already been aligned over a box at the reference frame. Compare the upstream fitted image with the same frame through the exported motion node. The motion stage should not be relied on to repair a mismatch that already exists at that starting frame.
Then inspect a later frame with clear perspective change. The accepted fitted label should follow the intended surface. This is a proposed comparison, not a tested insert or a guarantee that the track is accurate.
Verify the fit and the motion independently
Review the reference, beginning, end and largest perspective change. If the reference placement is wrong, return to initial fit. If placement starts correctly but drifts, inspect the track and computed model. If From points were edited, recompute before judging another render.
Accept only when the initial alignment remains correct and the tracked motion keeps the intended region attached throughout the required interval. Save the reference-frame number, fitted upstream version and linked Tracker setup together.
Related tasks
- How Do I Compare Part of a Fixed Reference Frame Over Moving Blender Preview?
- How Do I Export a Premiere Frame Showing the Edited Film Instead of the Source Clip?
- Why Does My Reference Video Slightly Zoom When Only the Focus Changes?
Sources and scope
- Natron2.5 official documentation: Temporarily disable CornerPin to set From geometry at the reference frame; To points are calculated by applying motion matrices; edits require recomputing; export stays linked.
- Natron2.5 Tracker node: Reference Frame is the identity frame when tracks are exported to CornerPin/Transform; Disable Transform permits reference-point editing.
Revision narrows the task after independent review: initial fit is explicitly outside this motion-transfer procedure. Natron 2.5 official tracking guide and Tracker node saved bodies were reread on 2026-10-23. Proposed checks are not executed tests; no score or approval assigned by author.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Paparazzi Ratzfatzzi / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.