To judge how strongly a feathered edge is selected in Krita, switch the selection display from Ants to Mask. Ants are useful for seeing what is outside the selection, but they do not show the different transparency levels along a soft edge. Mask mode lets you inspect those levels before you fill, apply a gradient, or paint.
Inspect the center, transition, and outside
With an active selection, use the display toggle at the bottom-left of the status bar to switch between Ants and Mask. Krita documents Mask as the view for inspecting selection transparency levels, including soft edges made with feathering. The Mask overlay’s red color can be changed in Preferences, so judge the areas by their visible overlay strength, not by assuming that a particular red is a numeric opacity value.
Follow these steps before the real edit:
- Activate the selection you intend to use and inspect a representative edge in Ants mode. Treat the moving boundary as an outline, not a measurement of the transition.
- Switch to Mask mode and compare three places: the solid interior, the feathered band, and the area beyond the selection.
- Check whether the transition band visibly differs from both the interior and the outside. If it does not, do not infer a particular selection strength from the ants; inspect another edge or proceed to a disposable test.
- On a duplicate of the artwork, make a small fill or gradient in a test area that crosses a comparable edge. Compare how the change appears in the interior, transition, and outside before applying the intended edit to the working document.
Hypothetical feather-edge worksheet
The following observations and choices are an illustrative check, not a guaranteed Krita result. Suppose an artist is preparing a feathered selection around a painted leaf and wants to apply a color gradient. They record what the three areas look like in Mask mode, then make a small gradient on a duplicate. The overlay color is configurable, so the worksheet records relative appearance rather than invented percentages.
| Sample area | Hypothetical Mask observation | Duplicate test observation | Decision |
|---|---|---|---|
| Center | Strong overlay across the selected leaf interior | Fill appears across the test interior | Interior appears selected; continue checking the edge |
| Transition band | Overlay visibly lighter than the center and still distinguishable from outside | Gradient changes gradually across the test edge | Transition appears partial; use only if that softness is intended |
| Outside | No visible overlay in the sampled area | No apparent change in the corresponding test area | Outside appears unselected in this sample; check other edges if relevant |
Accept the selection for this edit only when the transition is visibly partial in Mask mode and the duplicate test has no unexpectedly hard boundary. This is a check of selection strength for the tested operation, not a universal guarantee against spill in every local effect.
Limits and what to do if it fails
Mask mode is a visual inspection method; the documentation does not specify that its color corresponds to a numeric readout. Do not assign exact percentages from the overlay. A small test is an author-recommended comparison, not a documented feature that predicts every paint tool or gradient.
If the band is hard to distinguish, check another section of the edge and confirm that a selection is active: Krita’s display toggle does nothing when there is no selection. If the duplicate test shows an abrupt edge that is not wanted, pause before editing the original and reassess whether the current selection has the intended softness. This guide does not diagnose why it became hard or prescribe a feather value. Keep the selection structure unchanged if your task is only to inspect its present strength.
Common questions
Does Mask mode edit the selection? The documented display mode is for viewing transparency levels. This guide uses it for inspection, not as a claim that switching modes edits selection data.
Why can’t I judge softness from Ants? Ants are documented as best for seeing areas that are not selected. Use Mask to inspect the varying transparency of a soft selection.
Must I test every fill or gradient? Not as a Krita requirement. A small duplicate test is a practical check when the edge result matters; its result applies to that sample and operation, not automatically to every tool.
Sources
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.