For an illustration that must follow a restricted palette, choose Enforce gamut mask and verify it with a color you expect to fall outside the mask. Choose Just show the shapes when you want the mask to inform your decisions without restricting them. The visible shape alone does not tell you which behavior is active; Krita provides these as separate settings in the Artistic Color Selector.
Make the decision and set it up
Treat the mask as a constraint when the brief calls for a tightly limited palette, such as a two-hue scene with a reserved accent. Treat it as a guide when you want to compare colors against a planned scheme but may deliberately step outside it. These are workflow recommendations; the documented distinction is whether colors outside the mask can be selected.
- Open Settings → Dockers → Gamut Masks, choose a mask, and click its thumbnail to apply it to the color selectors. Pick a mask whose shapes suit the scheme you intend to explore.
- Open the Artistic Color Selector settings and set Gamut Masking Behavior to Enforce gamut mask for a hard boundary, or Just show the shapes for a visual reference.
- In the selector, note one color you can select inside the visible shape and identify a contrasting test color you expect to lie outside it. Use the selector itself for this comparison; the mask applies to color selection, not as a rule that recolors existing pixels.
- Try selecting both colors under the chosen behavior. Record whether the outside test color can be selected. If the brief requires a boundary, do not treat the setup as accepted until that test indicates selection is restricted.
Krita documents the setting and its two outcomes in the Artistic Color Selector manual. Its Gamut Masks guide explains masks as shapes on a color wheel that help plan and guide color choices.
Hypothetical acceptance worksheet
The following is an illustrative check for a fictional dusk illustration, not a report of software testing or a guarantee of a particular color-selection result. “Inside” and “outside” are the creator’s intended classifications for this mask; the documents do not define a counting or distance test for those labels. Record what you actually observe in your installation.
| Check | Hypothetical choice or observation | Decision |
|---|---|---|
| Palette intent | Muted blue-violet main colors; a coral accent kept within the chosen mask | The brief calls for a constrained scheme, so choose Enforce |
| Inside-mask sample | A muted violet selected from a visible shape | Record the selected color as the in-mask control |
| Outside-mask test | A vivid green deliberately chosen as the suspected outside test | Under Enforce, record whether Krita permits selecting it; if it does, pause and recheck the behavior setting and mask |
| Guide-mode comparison | Switch to Just show the shapes and try the same green again | If it becomes selectable, that supports the intended distinction for this check; record the actual result, not an assumed one |
This table separates the intended palette from the observed selector behavior. It does not establish that every color you classify as outside will behave identically.
Limits and what to do if it fails
The mask can be toggled off or on in the selector, and its rotation slider can rotate the mask. Toggling visibility changes whether the shapes are displayed; rotation changes their orientation around the selector. Neither control is documented as changing the selected behavior setting. After either action, check the resulting visible shapes and repeat the outside-color check if the boundary’s placement matters to your palette. A hidden mask is not useful as a visual guide, and visibility alone is not proof that selection is enforced.
If an outside test color remains selectable while you believe Enforce is active, confirm the Artistic Color Selector’s Gamut Masking Behavior, ensure the intended mask is applied, and test again. Krita’s documentation does not specify an automatic alert or a numerical tolerance for deciding whether a color is outside. If you need an exact production palette, keep an explicit list of approved colors as an additional review reference; do not assume the mask enforces constraints outside the documented selector behavior.
Quick questions
Does turning the mask off remove the restriction? The manual documents a mask visibility toggle, but does not describe it as changing the behavior setting. Verify selection again rather than relying on the display state.
Can I rotate the mask to test a different scheme direction? Yes. The selector provides a rotation slider; rotation changes the mask’s orientation, so reassess which colors fall within the visible shapes.
Will enforcing the mask alter colors already painted? The documented control governs which colors can be selected in the selector. The cited documentation does not say it recolors existing canvas pixels.
Sources and next step
- Artistic Color Selector Docker — Krita Manual 5.3.0 documentation
- Gamut Masks — Krita Manual 5.3.0 documentation
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.