To change the source of a Krita clone layer, select the clone layer or layers in the Layers Docker, open Set Copy From, choose a valid source, and check the canvas preview before applying. If you select several clone layers, first record each current source: the dialog shows a blank default when their sources differ, so one layer’s displayed content does not establish what the others will use.
Choose the target and inspect the selection
In the Layers Docker, identify the intended clone layers by their layer type, not by color or name alone. Before changing anything, note each selected clone’s current source and keep a recoverable document copy or other version you can return to. This gives you a baseline for checking the result and backing out if the new mapping is wrong.
Select one or more clone layers. For a multi-selection, use Ctrl- or Shift-click as described in the Krita Clone Layers manual. Right-click a selected layer and choose Set Copy From. The dialog’s drop-down contains the possible sources for all selected clone layers. If their current sources differ, its default selection is blank; if they share a source, that common source is selected. Treat a blank default as a prompt to choose deliberately, not as evidence that no source is available.
Before choosing a replacement, consider why an expected layer may be absent. The manual says a selected clone layer cannot be a source. Its parent and clones of an invalid layer are also invalid; other layers are valid. Do not assume a missing item can still be assigned. Confirm the proposed target is actually offered in the dialog.
Hypothetical source-mapping worksheet
This invented example shows a way to record observations; it is not a report of operating Krita or a guarantee of how a particular document will look. The artist has three source layers and two clone layers. Their names are illustrative, and source eligibility must still be checked in the actual dialog.
| Layer | Type | Current source | Proposed check | Multi-selection observation | Decision before applying |
|---|---|---|---|---|---|
| Character Paint | Paint layer | Not applicable | Candidate source | Offered in the hypothetical dialog | Confirm its visible character detail in preview |
| Glow Color | Paint layer | Not applicable | Candidate source | Offered in the hypothetical dialog | Check that the preview matches the intended color source |
| Background Texture | Paint layer | Not applicable | Candidate source | Offered in the hypothetical dialog | Use only if the texture is the intended content |
| Glow Clone | Clone layer | Character Paint | Redirect to Glow Color | Selected with Shadow Clone; current sources differ, so default is blank | Confirm both selected clones show the intended source preview |
| Shadow Clone | Clone layer | Background Texture | Redirect to Glow Color | Same mixed-source selection | Apply only if changing both mappings is intentional |
For this exercise, suppose the artist also considers Glow Clone as a source. It is selected as a clone layer, so it is invalid under the manual’s criteria and should not be treated as an available target. This hypothetical worksheet records the meaningful observation—mixed current mappings and the need to check both clones—not a predicted pixel result or a software test.
Preview, apply, and check the mapping
When you select a source in the drop-down, Krita shows a canvas preview. Compare a feature that distinguishes the intended source, such as the character silhouette, glow color, or background texture, rather than relying on the layer name alone. The preview is an author-recommended comparison; the manual defines it as a preview of the canvas, not as a guarantee that every part of a complex stack will be easy to identify.
If the preview does not match your intended source, choose another offered layer or click Cancel to discard the dialog’s changes. If it does match, click OK to apply. The manual notes that making changes to the image outside this dialog applies those changes and automatically closes the dialog, so avoid unrelated canvas edits while deciding.
After applying, inspect the selected clone layers again and reopen Set Copy From when you need to confirm the mapping. For a multi-selection, verify whether the reopened dialog indicates a common source or a blank default. Compare that state with your written record; do not infer that every selected layer was redirected just because the canvas looks plausible.
Limits and common questions
If the desired layer is missing from the drop-down, check its actual layer type and whether it is a selected clone, a parent of an invalid layer, or a clone of one. If it falls under one of those exclusions, choose another valid offered source or revise the layer structure before trying again. The manual does not establish that every absent layer can be made eligible by changing visibility, color, or selection order.
Can I change several clone sources at once? Yes. Select one or more clone layers and use Set Copy From; the chosen source is intended for all selected clones. For mixed current sources, the default is blank, so choose and verify the target deliberately.
Why is the source drop-down blank? For multiple selected clones, a blank default means their current sources differ. It does not by itself mean the list has no valid options.
Can a clone layer be its own source? No. A selected clone layer is invalid as a target, as are its parent and clones of an invalid layer, according to Krita’s documented source-selection rules.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.