If a shot looks green while its warmth seems appropriate, do not keep changing temperature just to chase the green. In Kdenlive, start with a credible neutral-color reference, then assess the green cast separately: the standard White Balance effect has a Green Tint control, while White Balance (LMS) offers an output color temperature in Kelvin. A neutral sample gives you a reference; it does not tell you by itself which control should address the remaining cast.
Choose the control from the problem you can observe
Kdenlive documents Neutral Color in both effects as a picker for the source color that should be white. The standard White Balance effect also has Green Tint, described as adjusting the level of green. White Balance (LMS) instead includes Color Temperature, an output target in Kelvin. These are distinct documented controls, not interchangeable labels for one adjustment. See the White Balance documentation and White Balance (LMS) documentation.
Use this order for a shot with a suitable neutral object:
- Identify a patch that should be neutral white or gray under the shot’s lighting. Avoid a clipped highlight, strong reflection, or an object whose apparent color is uncertain. Treat the sample as a reference, not proof that every color in the shot is accurate.
- Apply White Balance and use Neutral Color to sample that patch. Recheck the image, including the same patch and important colors such as skin or a product.
- If the reference and other areas still look green, while the overall warmth is already acceptable, adjust Green Tint as a separate trial. Change only that control, then compare against the same reference area.
- Choose White Balance (LMS) when your goal includes a specific Kelvin output target, rather than simply reducing a green-looking cast. Make one temperature change at a time and reassess the same patch and important colors.
- Keep the result only if the green impression is reduced without making the reference or other important colors look less plausible. If the reference itself is unreliable, do not treat a picker result as a verified neutral balance.
The LMS documentation says lower Kelvin values correct for warmer lighting, higher values for cooler lighting, and 6,500 K is the unity default. That describes the temperature control; it does not establish a best setting for a green cast or promise that changing Kelvin will resolve it.
Use a comparison worksheet to decide what changed
The following is a hypothetical review, not a measured result or expected software behavior. Imagine a clip with a white card that appears greenish, skin that looks plausible, and warmth the creator wants to retain. Record what you see before assigning a cause. Compare the same frames and image areas; the table’s qualitative labels are observations, not Kdenlive output categories.
| Checkpoint | Hypothetical observation | One control changed | Next decision |
|---|---|---|---|
| Neutral sample | Card looks greenish; skin looks plausible | Neutral Color picker | Keep as a reference, then judge whether green remains |
| Green trial | Card seems less green; warmth looks similar | Green Tint only | Compare skin and a second important color before accepting |
| Kelvin trial | Kelvin target changed; card’s appearance also shifted | LMS Color Temperature only | Decide whether the output target is met; do not infer a green correction from Kelvin alone |
| Reliability check | Card may be colored or lit differently from the subject | None | Find a more credible neutral reference or treat the correction as uncertain |
This log adds a useful distinction: note whether your goal is “less green” or a specified Kelvin output. If both matter, resolve them as separate judgments and record which control you changed at each stage. Do not claim a setting was successful merely because the sampled patch changed; inspect the rest of the shot too.
Limits and what to do when the cast remains
A picker cannot establish that an unknown white-looking object is truly neutral, and the cited parameter descriptions do not promise accurate color reproduction or a guaranteed correction. Mixed lighting, colored reflections, or a reference that does not share the subject’s light can make one global judgment misleading. The documented controls also do not diagnose why the image looks green.
If Green Tint changes the reference but makes skin or another important color less plausible, return to the comparison point and reconsider the reference and lighting before making another adjustment. If an explicit Kelvin target is required, assess that target with LMS separately; do not use repeated temperature changes as a substitute for diagnosing a green shift. When no dependable neutral reference exists, record the uncertainty and avoid presenting the result as calibrated.
Common questions
Should I use the Neutral Color picker instead of Green Tint?
Use it to establish the color in the source that should be white. If a green cast remains after that reference step, assess Green Tint separately; the sample alone does not choose the correction axis.
Does LMS temperature have a Green Tint control?
The documented LMS parameters list Neutral Color and Color Temperature. The standard White Balance page lists Green Tint. Choose according to the documented control and the adjustment you need.
What if changing Kelvin makes the shot warmer or cooler but still green?
Stop using Kelvin to chase that remaining cast. Recheck the reference and, if appropriate, evaluate Green Tint as its own adjustment. Inspect the same areas after each single-control change.
Sources and next step
- White Balance — Kdenlive 26.08 Manual 26.08 documentation
- White Balance (LMS) — Kdenlive 26.08 Manual 26.08 documentation
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the film workspace. The external software controls discussed above belong to their respective products.