To split a Kdenlive video and its separate audio at the same point, make sure the intended clips are grouped, place the timeline cursor at the target timecode, then cut the grouped video clip. Kdenlive’s manual says that when a grouped audio clip is linked to the video, cutting the video also cuts the audio at that point. Check the result on each track, including any other group members.
Check the group and place the cut
Before cutting, identify the video clip, the separate audio clip, and every other item in their group. Grouping means that clips are linked for operations such as moving; it also enables the documented synchronized cut. Do not include a title, music bed, or other item if it should remain continuous across this edit. The Kdenlive grouping documentation describes selecting multiple timeline clips and grouping them, as well as how grouped clips are edited.
- Read the timeline’s clip labels or other type indicators to identify the video and audio items. Treat a border or selection color only as a visual clue; confirm the item’s actual type from its label or track.
- Check the group’s other members. If an unrelated item must not be affected, remove it from the group before this edit using Kdenlive’s documented ungrouping controls, then regroup only the intended clips if needed. The manual lists
Timeline > Ungroup Clips, the right-click menu, andCtrl+Shift+Gfor ungrouping. - Move the timeline cursor to the intended timecode. You can seek using the timeline or enter a timecode in the Monitor timecode widget, as described in the Kdenlive editing documentation.
- Select the grouped video clip and use
Timeline > Current Clip > Cut Clip, the right-clickCut Clipaction, or the documented default shortcutShift+R. The grouping documentation specifies that cutting the video this way also cuts its grouped audio at the same point.
This procedure assumes the intended audio is a separate timeline clip and is grouped with the video. It does not establish that an ungrouped audio item, or audio still contained inside a single audiovisual clip, will behave the same way.
Use a cut-point verification sheet
The following example is hypothetical. Its observations are a proposed way to audit a real timeline, not a report of a Kdenlive test or a guarantee about how every project is configured. Record the intended timecode before cutting, then compare the boundaries afterward.
| Item to inspect | Hypothetical observation | Decision |
|---|---|---|
| Video on V1 | Intended boundary at 00:00:12:10 | Use as the reference cut point |
| Separate dialogue on A1 | Boundary appears at 00:00:12:10 | Matches the intended point; retain the group relationship |
| Music on A2 | Continuous across the point, but was listed as a group member | Investigate whether this member should have been excluded before cutting |
| Title on V2 | No boundary at the point; listed as outside the group | No change is expected from the group cut; confirm its timing remains suitable |
For your project, record the actual track and timecode rather than copying these sample values. Inspect both resulting sides of the boundary on every intended track. The goal is agreement at the chosen timeline position, not merely seeing two clip blocks after the operation.
Limits and what to do if it fails
If the audio does not split where expected, first verify that the selected video and the separate audio are members of the same group, and that you cut the video clip rather than making a different edit. If the audio is embedded in the video rather than represented as a separate grouped clip, the cited grouping rule does not describe that case. For separately editable audio and video from one source, Kdenlive’s editing manual describes splitting audio and video when placing a clip on the timeline, or using the right-click Split Audio action; this is distinct from the grouped-clip cut behavior.
If an unintended group member changes, stop and inspect the group contents before making another cut. Use the documented ungroup control to separate items, then group only the clips that should share this edit. The manuals establish the automatic cut for grouped audio and video; they do not promise that unrelated clips will be excluded if you have included them in the group. The verification sheet is an editorial check, not an application feature or an executed test.
Three quick questions
Does the audio need to be selected separately before cutting? The documented method is to cut the grouped video. The manual says its grouped audio is cut at the same point automatically.
What if the audio is not grouped with the video? The documented automatic behavior applies when an audio clip is grouped with the video. Check the group relationship before relying on synchronized cutting.
Can I include background music in the same group? Only if it should share this cut. If it must continue uninterrupted, exclude it from the group and verify its boundary after the edit.
Sources and next step
- Grouping — Kdenlive 26.08 Manual 26.08 documentation
- Editing — Kdenlive 26.08 Manual 26.08 documentation
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the film workspace. The external software controls discussed above belong to their respective products.