
Check the operands' stacking order before using Inkscape Difference. Put the intended base below the shape that should cut it, then select only those operands. Reversing their order changes which shape receives the subtraction.
Key Takeaways
- The lower object is the operation's base.
- Selection order is not a substitute for inspecting object stacking.
- Preserve the original operands until the resulting hole and outline are verified.
Assign a base and a cutter
Imagine a solid badge with a small circular opening for a portrait-layout ornament. The badge is the base; the circle is the cutter. If the circle sits underneath, Difference can produce a result that is logically consistent with the stack but wrong for the intended design.
The Inkscape-linked Boolean Operations manual emphasizes that stacking order matters and that the bottom object is the one to which the operation applies. Its command icons show a circle above a square to illustrate the relationship.
Keep a copy of both original shapes. Changing order on preserved operands is easier to reason about than rebuilding a shape after several mistaken subtractions.
Inspect the actual operands
Select the badge and circle deliberately. If they are inside nested groups, locate the intended children using the group-selection workflow rather than dissolving every group.
Confirm that:
- The base is the object you intend to retain.
- The cutter sits above it.
- Only the intended operands participate.
- The shapes are paths or suitable convertible objects.
Then use Path > Difference and inspect the result. These instructions follow the Beginners' Guide 1.3 controls.
If nothing useful happens, read the status-bar error before trying another operation. Boolean geometry does not automatically subtract a photographic subject from a placed image; a photo crop and a path subtraction are different tasks.
Check the remaining object, not only the missing area
For the proposed badge, inspect the outer silhouette, the circular opening and the narrow material between that opening and the edge. The expected result retains the base and removes only the approved region.
A visually convincing hole is not enough if an unintended fragment or a missing outer section remains elsewhere. Move or inspect the result on a working copy to distinguish a real opening from another object covering it.
Accept the operation when the base's intended outline and hole survive together. Keep the original operands identifiable for later redesign.
If the artwork will be cut physically, the cut-path handoff guide adds material and machine acceptance checks. Correct Boolean order establishes the intended subtraction; it does not establish that a narrow remaining bridge will survive production.
Related tasks
- How Do I Edit One Eye in a Nested Inkscape Group Without Ungrouping the Drawing?
- Can I Send Vector-Looking AI Artwork to a Cutting Plotter?
- How Do I Make an Open Arc Instead of a Pie Slice in Inkscape?
Sources and scope
- Boolean Operations: Boolean operations depend on stacking order; the bottom object is the one receiving the operation. Difference subtracts one path from another, and the Path-menu icons illustrate top and bottom operands.
Inkscape-linked Beginners Guide 1.3 documentation synthesis; installed UI was not inspected. No hands-on test, search-volume or measured citation-rate claim. Scenarios and comparisons are proposed editorial examples, not reported experiments.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: AI-generated conceptual editorial illustration; not a real application screenshot, observed output or before-and-after test.