Choose Auto Passthru, limit its allowed formats to the ones you want to preserve, and set a fallback encoder for tracks that do not match. HandBrake’s documented rule is conditional per track: a source format that matches the passthru selection can be passed through; a non-matching format is re-encoded with the fallback encoder. This does not mean every track is passed through, or that one bitrate setting applies to every track.
Decide the path for each track
In HandBrake, open the audio settings for the title and select Auto Passthru. In its format options, leave enabled only the source formats you intend to pass through. Then choose a fallback encoder. Use the track list to confirm which source tracks are included; selection rules determine what gets added, while the encoder choice determines how an included track is handled.
Apply this sequence to a real job:
- Scan the title and note each included track’s displayed source format. Do not infer format from a track name or channel layout.
- Write down the formats your delivery specification allows you to pass through. If the specification is unclear, ask the recipient before choosing the list.
- Enable only those formats in Auto Passthru, then choose a fallback encoder suitable for your delivery requirements.
- Review the audio track settings. Bitrate, mixdown, and samplerate are relevant when fallback encoding is used; they do not change the settings of a track that takes the passthru path.
- After encoding, inspect the output’s track format and compare it with your intended per-track route. This inspection is an editorial verification step, not a guarantee that every player or container accepts the result.
The exact encoder choices available can depend on the application’s offered options. Choose from the controls actually shown for your job; the documentation does not establish that every encoder is available for every source or output.
Hypothetical acceptance worksheet
Suppose a project contains three included tracks: AC3, DTS, and AAC. The delivery requirement in this example permits AC3 and DTS passthrough; AAC is not on the allowed list. The table records the expected route under those assumptions, not an observed HandBrake encode. After encoding, replace “expected” with the output track information you actually inspect.
| Source track | Allowed by this job? | Expected route | What to verify |
|---|---|---|---|
| AC3 | Yes | Passthru | Output remains AC3; fallback controls are not its encoding settings |
| DTS | Yes | Passthru | Output remains DTS; confirm the chosen output is acceptable to the recipient |
| AAC | No | Fallback re-encode | Output uses the selected fallback encoder; check applicable bitrate, mixdown, and samplerate settings |
Limits and what to do if it fails
Passthru preserves the source format rather than converting that track to the fallback codec. It therefore does not solve a delivery requirement that rejects a passthrough format. If a track appears to take the wrong route, first compare its displayed source format against the enabled Auto Passthru list. Then check that a fallback encoder was selected and that the track was included. If the output still differs from the intended route, review the output track information and adjust the configuration before making the delivery copy.
The documentation describes which route the settings select; it does not guarantee compatibility with a particular recipient’s playback system. Confirm acceptance requirements separately. Do not assume bitrate, mixdown, or samplerate changes can alter a passthrough track.
Three quick questions
Does Auto Passthru preserve every source track? No. Only matching formats take the passthrough route; other included formats use the fallback encoder.
Can I use a fallback encoder without limiting the passthrough list? Yes. The fallback is for a source format that does not match the selected passthrough format. Limit the list when you want only particular formats passed through.
Why did changing bitrate not affect one track? If that track used passthrough, bitrate is not controlling its audio encoding. Check whether it matched an allowed format.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the film workspace. The external software controls discussed above belong to their respective products.