
Figma supports SVG and PDF exports at 1x. Its larger export multipliers apply to other supported output formats. Choose the format from the recipient's need, then verify the dimensions in the destination. A missing 2x control for a vector export is not evidence that the design lacks detail.
Key Takeaways
- SVG and PDF have a documented 1x export restriction in Figma.
- Raster pixel dimensions and vector display dimensions answer different questions.
- Test the final placement size instead of renaming a file “2x.”
Identify the requested dimension
A developer asking for a high-density product thumbnail may need a larger raster image. A print supplier asking for a particular finished width may need correctly sized page artwork. Those requests should not be reduced to the same multiplier.
Start with the intended display or physical size and the allowed formats. For a proposed website tile, a larger PNG may be suitable. For a printable card, ask the supplier for the finished dimensions and PDF requirements. The pixels-to-print-size guide helps translate physical output requirements without treating DPI metadata as new detail.
Use the supported export route
Figma documents the format restrictions: SVG and PDF export only at 1x. Its scale controls for supported image formats accept multipliers or fixed width and height values.
Choose a raster format if a fixed pixel size is the actual requirement. Inspect the resulting width and height after export. Keep an editable source so later layout changes do not depend on enlarging the delivery copy.
For SVG, Figma notes that display sizing can be adjusted through SVG code or width and height variables. That is a way to set how vector content is presented. It does not recreate missing detail in photographs embedded within that design.
Protect the artwork boundary
Select the intended frame or object before export and confirm that its boundary matches the deliverable. A correctly scaled asset can still have the wrong crop or excessive empty space. The export-boundary guide covers why page, drawing, and selection boundaries should not be treated interchangeably.
For a hypothetical invitation, record the expected card rectangle and the actual receiving application's measurement. If the PDF reports a different page size, inspect its page boxes before assuming a higher export scale would solve the problem.
Inspect both vector and photo content
Open the delivered SVG or PDF in the intended application. Check its displayed dimensions, text placement, and embedded imagery separately. A logo edge may remain crisp while a small source photo becomes visibly soft at the chosen size.
Approve the asset only when it meets the destination's size and appearance requirements. The acceptance note should identify the actual exported format and measured dimensions, rather than claim that all contents are “high resolution.”
This procedure is grounded in Figma's documented controls. It does not report a live export test or guarantee identical import behavior across design and print software.
Related tasks
- How Large Can You Print a Generated Image?
- Why Does the PDF Page Size Differ from the Finished Artwork Size?
- Why Does an Inkscape PNG Include Off-Page Objects or Cut Off the Artwork I Wanted?
Sources and scope
- Export formats and settings for static designs: Format-specific export scale restriction; destination dimensions need a separate check.
Documentation-based guidance. Examples and acceptance checks are proposed, not measured software tests.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: AI-generated conceptual editorial illustration; not a real application screenshot, observed output or before-and-after test.