
A long gap between GPS fixes does not always make ExifTool refuse a geotag. Depending on its time-limit settings, it may fall back to the nearest fix. Review interpolation and extrapolation together when the goal is avoiding a fabricated-looking path across missing track data.
Distinguish three cases
A photo time may lie between sufficiently close fixes, near one isolated fix, or too far from any allowed fix. These cases should not all be described as “matched the track.”
The ExifTool geotagging options distinguish GeoMaxIntSecs from GeoMaxExtSecs. A gap exceeding the interpolation limit can be treated through nearest-fix extrapolation rather than immediately rejected.
Define the intended policy before tagging
Measure the enclosing gap and distance in time from the image to the nearest recorded fix. Decide what evidence the task requires.
For an illustrative policy, interpolation might be limited to gaps of 120 seconds while nearest-fix extrapolation is permitted only within 30 seconds. These values are planning examples, not recommended geographic accuracy thresholds:
exiftool -api GeoMaxIntSecs=120 -api GeoMaxExtSecs=30 -v2 -geotag track.gpx sample.jpg
This is a metadata write on a proposed disposable sample. Retain the original and inspect diagnostics.
A five-minute gap under that example policy is too long for interpolation. A photo only fifteen seconds from an allowed fix may still receive that fix's coordinates; a photo in the gap's middle can be beyond the permitted nearest-fix time. Do not describe the policy as “reject every point inside a long gap.”
Check time alignment before blaming gap rules
A camera clock error can place an otherwise valid photo outside the recorded period. Confirm tracklog and capture-time alignment first.
Time proximity also does not establish distance accuracy. A fast-moving subject can travel substantially between fixes. Choose acceptance from the source evidence and intended use rather than declaring a universal safe number of seconds.
Test accepted and rejected positions
Use three proposed samples: a healthy interval, a point near a gap edge and a point outside the allowed nearest-fix window. Read written coordinates and diagnostics for each. No such test was executed here.
If the output is a nearest-fix assignment, label it accordingly in the review record instead of calling it an interpolated location. If the source cannot justify the desired position, leave that location unresolved.
Finally, apply the location-metadata sharing check. A careful matching policy governs which coordinate is assigned; it does not decide whether exposing that coordinate is appropriate.
Related tasks
- Lightroom GPX Auto-Tagging Misses Photos: Check the Tracklog Time Offset
- How Do I Check a Photo for Location Metadata Before Sharing It?
Sources and scope
- Geotagging with ExifTool: Dated synchronization anchors enable piecewise-linear clock-drift correction. Interpolation and nearest-fix extrapolation have separate time limits. A GPS log CSV requires coordinate and timestamp columns, distinct from a metadata import CSV.
Official-documentation synthesis researched on 23 October 2026 (Asia/Shanghai). Readable official deep-page text was obtained through public search; direct ExifTool fetches may return HTTP 403. No configuration, file edit, coordinate export or geotagging test was executed. Namespaces, paths, ASCII trial text, coordinates, dates and thresholds are explicitly illustrative. The unavailable forum page is not used as supporting evidence for this article. Exact installed-version and receiving-system behavior require the stated acceptance checks.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Mak Cézar / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.