A rendered presentation video already contains page timing. Adding longer digital-human narration does not automatically extend each page. MetaStudio’s animation FAQ recommends separate page videos when their playback and narration need different timing. Decide the assembly unit before trying to repair every mismatch with global playback changes.
Measure the page-level mismatch
Write the narration duration and relevant visual duration for each page. Identify when an essential diagram disappears, whether its animation needs to finish, and what should remain visible afterward. Distinguish a page that advances too early from a video whose audio merely starts late. They may sound similar in a review but require different corrections.
Imagine a hypothetical lesson with three pages lasting five seconds each in the presentation export. The second page now needs twelve seconds of explanation. Slowing the entire fifteen-second video changes the other pages and may distort embedded motion or sound. The mismatch belongs to the second scene, not necessarily to the complete film.
Choose an appropriate scene asset
Where supported, export or prepare one video per page and place it in the corresponding narration scene. Inspect the source boundaries so no transition from the previous page remains at the beginning. Keep the page identifier with the file. If a page is static, a still image may be simpler than a looping video, subject to the receiving workflow.
| Page behavior | Required audience experience | Review decision |
|---|---|---|
| One-time reveal | Watch reveal once, then understand result | Check end-state holding route |
| Repeating demonstration | See a meaningful repeat | Inspect loop boundary and count |
| Static diagram | Read during narration | Consider a suitable still |
| Transition to next page | Advance after complete explanation | Verify scene boundary |
This original example is a planning aid. It does not establish that a particular platform offers automatic freeze-frame behavior or that looping is always appropriate.
Inspect one-play and loop choices
Check what the current product does when a page video ends before the narration. Do not assume that it freezes on the last frame. A loop can fill time but may repeat a staged reveal misleadingly or reset a counter. A single play may end too early or leave an unwanted blank interval. Test the chosen behavior in the actual scene preview or a prepared review export.
Listen for the video’s own soundtrack repeating under the narration. Keep important audio ownership clear. If changing playback speed is genuinely appropriate, review motion and sound after the change rather than using duration alone as the pass criterion.
Review scene seams in the final file
Once each page works, play the assembled lesson from before one scene boundary to after the next. Confirm that narration finishes, the intended final visual remains long enough, and the next page appears at the approved moment. Check for duplicate transition frames and missing audio tails.
Retain the original presentation, per-page assets and approved timing sheet. In an Imagild project these are externally prepared materials unless the selected workflow explicitly supports the assembly. This article does not promise automatic narration-driven PPT timing. Its outcome is a scene-level pacing decision supported by actual playback evidence.