When darktable 5.6’s contrast equalizer makes noise more visible, enhance only a scale where the desired texture is distinguishable from noise; use the corresponding denoising spline to suppress noise at its own scales. Judge luma and chroma separately. If detail and noise occupy the same scales, reduce the overall mix or leave that detail untreated rather than expecting the module to separate them.
Decide which scales to adjust
The module adjusts contrast and denoising at wavelet detail scales, with separate luma and chroma tabs. The graph’s alternating stripes indicate detail scales visible at the current zoom; points outside the striped region will not affect details visible in that view. This is a zoom-dependent view of scale visibility, not a measure of whether an edit improved the image. The darktable 5.6 manual describes the scale display and its zoom dependence.
Use this sequence for a crop with a specific target, such as fine fabric weave:
- Choose a zoom at which you can judge the target texture and note which part of the graph is striped. If you change zoom, reassess the stripes before attributing a visual change to the curve.
- On the luma tab, identify whether the target is brightness texture, and separately note the scales where brightness noise is visible. Use the striped region at your current zoom together with the image to locate each: mark the graph area for the target texture and the area for visible noise. The manual describes raising the main spline to increase local contrast and raising the lower denoising spline to reduce noise at selected scales. Adjust only the corresponding control points. If the target and noise cannot be distinguished or occupy the same scales, reduce mix or leave the detail untreated.
- Adjust only the luma contrast control point or points in the marked target-texture region, with a restrained curve change. If noise becomes more conspicuous, raise the separate lower luma denoising spline at the marked noise scale; darktable’s manual specifies that raising this spline reduces noise at that wavelet scale. Return to the ordinary image view to assess the result.
- Switch to chroma and make a separate observation: use the current striped region and the image to mark the graph area for desired color detail and the area for colored noise or unwanted color texture. Adjust only the corresponding chroma contrast control points for desired detail or the separate lower chroma denoising spline for noise. If those scales overlap or cannot be distinguished, reduce mix or leave the detail untreated. Luma control is not a substitute for judging color noise.
- If you cannot tell which image regions a point affects, temporarily use the module’s difference blend mode. The manual says the image becomes black except where module output differs from input. Use it as an influence map, then return to normal blending for the image-quality decision. The manual’s luma and chroma sections explain the separate contrast and denoising controls.
Record a scale review
The following is a hypothetical review, not a guaranteed result or a measured test. “Coarse” and “fine” refer to observed graph regions, not fixed pixel sizes. Record observations at one chosen zoom; after changing zoom, reassess visibility rather than assuming the same region remains visible.
| Current view and observation | Curve decision | Difference check and acceptance |
|---|---|---|
| At the chosen zoom, the fabric weave appears in a fine striped region; brightness grain is also visible there. | Raise luma contrast slightly only around the target region; test luma denoising where grain is observed. | Record whether weave clarity improved and whether grain remained acceptable. |
| Colored speckles are visible in a different chroma region from the fabric’s color boundaries. | Leave chroma contrast unchanged; test chroma denoising at the speckle region. | Record the effect on the color boundaries after returning to normal blend. |
| At a second zoom, the striped range changes and the target no longer looks distinct from noise. | Re-evaluate visible scales; reduce mix or undo the enhancement if separation is unclear. | Record the intended working zoom and whether the enhancement was retained. |
The mix slider controls effect strength. While your pointer is over the spline graph, darktable displays the curve as if mix were 1.0; move the pointer away from the graph to restore the curve display for the actual mix. Then use the ordinary image view for the final decision.
Limits and what to do next
This is a scale-selective local-contrast and denoising tool, not a guarantee that detail can be recovered or separated from noise. The manual describes adjustments by scale but does not promise that real image features and noise will occupy separate scales. If raising contrast makes texture look brittle, or denoising visibly removes the texture you wanted, reduce mix. If no useful separation remains, leave that scale neutral or omit the enhancement.
If the problem is halos or gradient reversals around edges, investigate edge-awareness separately; it is outside this scale-and-noise review.
Does the striped region tell me which scale is noise?
No. It indicates which detail scales are visible at the current zoom. Identify noise by inspecting the image, then compare its apparent scale with the target texture.
Should I denoise luma and chroma the same way?
Not automatically. Record brightness noise on luma and colored noise on chroma, then judge each tab independently. The manual notes chroma denoising can generally be more aggressive at larger scales and less effective at smaller ones; this is guidance, not a promise for every image.
Does difference mode prove the edit looks good?
No. It reveals where output differs from input. Return to normal blending to decide whether the target detail is clearer and whether noise or color boundaries have become objectionable.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.