A saturated blue LED highlight can turn cyan or pale after AgX because AgX shapes the color’s path toward white as intensity rises; that is not necessarily an exposure error. First hold white balance and mid-tone exposure steady, compare the same RAW with AgX as its only display transform, and inspect the highlight’s hue and saturation. Consider changing primaries only if that controlled comparison points to the highlight color path.
Establish a controlled comparison
Use the same RAW and processing state throughout. Change one variable at a time; this is a comparison method for diagnosis, not a guarantee that a particular setting will restore the light’s original appearance.
- Set a reasonable white balance. Begin with the camera’s recorded setting. You may compare a neutral reference only when the reference is known to be neutral and is lit representatively for the scene; otherwise retain the camera setting or mark the baseline as unconfirmed. darktable describes white balance as scaling RAW RGB channels; it aims to render neutral objects neutrally, not to make every colored light neutral. Do not treat a wall as a more correct reference merely because it looks more neutral after adjustment. See the white balance documentation.
- Set mid-tone exposure before judging AgX. darktable recommends using the exposure module for this. Keep that exposure fixed across comparisons; do not use the blue highlight alone to set the overall brightness.
- Confirm AgX is the only display transform. Disable competing transform modules, including sigmoid, filmic RGB, and base curve. A second transform can change the rendering and confuse the diagnosis.
- Compare AgX on and off on the same RAW, at the same zoom and display conditions. Note whether the blue area shifts toward cyan, loses saturation, clips, or retains detail. Treat the visible color as an observation, not proof of the LED’s emitted spectrum.
- If the shift is localized to bright saturated colors and the baseline is credible, compare AgX primaries configurations. Change one relevant control at a time, such as blue attenuation or blue rotation, and return to the same baseline between candidates. AgX’s primaries shape color before its curve; attenuation changes the rate of desaturation with intensity, while rotation changes the direction of hue shift. The AgX documentation recommends relying on built-in primaries initially and describes custom tuning for special lighting, including LEDs.
Blue-light diagnostic worksheet
The following values and observations are hypothetical acceptance notes, not a software test or a promised AgX result. Record the comparison in words or with consistent picker readings; the manual does not prescribe a particular measurement procedure.
| Candidate | Fixed conditions | Highlight observation | Decision |
|---|---|---|---|
| A: baseline | Same RAW; camera white balance; exposure unchanged; AgX only | Blue lamp is saturated before AgX; rendered highlight looks cyan-white | Keep as reference; do not infer a bad exposure from hue alone |
| B: white-balance check | Same RAW and exposure; compare the camera setting with one neutral-reference adjustment only if the reference is known to be neutral and representatively lit; AgX only | If the reference qualifies, it may support a different baseline; the lamp may remain cyan. If it does not qualify, its visual neutrality is inconclusive | Use the qualified reference only when its conditions are met; otherwise retain the camera setting or mark the baseline unconfirmed. Do not judge white balance from the lamp or from a wall merely looking more neutral |
| C: primaries comparison | Return to A; change only one blue primaries control | In this hypothetical observation, the highlight looks bluer, while nearby tones also change slightly | Keep only if the broader image remains acceptable; otherwise restore A |
| D: transform check | Return to A; verify sigmoid, filmic RGB, and base curve are off | A competing transform was enabled in the working state | Correct the transform setup before attributing the result to AgX primaries |
The worksheet separates a credible input baseline from the display rendering, then records whether a primaries change has a useful trade-off. It does not claim that cyan-white is always wrong: the light, RAW capture, and intended rendering all matter.
Limits and next steps
AgX primaries affect color rendering across tonal values, not just one LED pixel. A change that favors the highlight may alter other colors, so judge the full image as well as the lamp. The manual warns that primaries adjustments are difficult to assess without high-quality processing, especially for highly saturated colors and narrow-spectrum sources such as LEDs. Enable that processing before making a fine comparison.
If the highlight remains pale, first check whether it has usable color information and detail in the RAW; a display transform cannot be assumed to reconstruct information that was not captured. If the baseline or transform setup is uncertain, resolve that before further tuning. If only the artistic rendering is unsatisfactory, compare built-in AgX primaries presets or a restrained manual adjustment, keeping exposure fixed. Do not stack another display transform to counteract the color shift.
Three quick questions
Should I raise exposure to bring back blue? Not as a color correction. Exposure changes the tonal input; use a fixed mid-tone baseline while diagnosing hue and saturation.
Does blue attenuation mean the blue channel is simply darker? The manual describes attenuation as primaries manipulation that desaturates and changes the intensity-dependent path. It is not merely a global brightness control.
Does a cyan highlight prove my white balance is wrong? No. White balance should be judged against credible neutral objects and lighting. A saturated LED can still render differently through AgX’s highlight color path.
Sources and next step
This guide interprets public documentation and uses explicitly hypothetical acceptance examples, not application tests. Controls and availability can change; verify the cited manual against your installed version.
For work created in Imagild, carry the input requirements and acceptance checklist into the photo editor. The external software controls discussed above belong to their respective products.