
An LCC reference can contain illumination correction without the dust map you expected. In Capture One, enable Include Dust Removal Information when creating the LCC reference, then apply that reference to the photograph needing correction. Dust information is recorded separately from the other calibration effects; the reference image's appearance is not proof that the dust correction has been applied.
Capture One's dust-removal instructions describe the plate capture, creation option and Apply LCC operation. These are three different parts of the workflow.
Start with the plate capture, not an unrelated pale image
The documented reference is a RAW photograph of an LCC plate made with the same exposure settings as the affected photograph. Locate that file before changing the correction. A normal picture of a white wall is not automatically an equivalent calibration.
For a proposed tabletop-shoot check, identify a photograph showing a dark spot on a smooth background and its corresponding plate exposure. Keep both available. Note whether the sensor was cleaned or the capture setup changed between them; a dust pattern from another point in the shoot may no longer describe the affected frame.
Do not confuse dust calibration with ordinary white balance. A gray reference for white balance addresses a different measurement, while the LCC workflow needs information about where the sensor-dust effects appear.
Record dust information during LCC creation
Select the plate image in the Browser and open the LCC tool. If the tool is absent from the Shape tool tab, the support article describes adding it through Add Tool > LCC.
Open the LCC tool's action menu, choose Creating LCC Options, and enable Include Dust Removal Information. Alternatively, check that option in the warning dialog opened by Create LCC. Create the reference only after confirming that the dust option is enabled.
This sequence matters when diagnosing an existing reference. Seeing an LCC label establishes that a reference was created, but does not by itself establish which creation options were used. If the necessary information was not recorded, return to a suitable plate RAW and create the intended reference rather than expecting an unrelated adjustment slider to supply the missing map.
Apply the reference to the affected photograph
Select the photograph needing correction together with the LCC reference, then use the documented right-click Apply LCC command. Inspect the target photograph, not just the reference.
Use a small number of recognizable spots as a proposed acceptance check. Compare the same locations before and after application, while also inspecting meaningful subject detail nearby. A change in overall brightness is insufficient evidence that the dust-removal part worked. Illumination correction and dust correction should not be treated as one indistinguishable result.
The flat-field calibration guide explains why a spatial calibration reference must match its optical setup. Its Lightroom conversion steps are separate from Capture One's LCC commands.
If the spot remains
Recheck the creation option, the selected target and the relevance of the reference before rebuilding a larger preset collection. Capture One cautions that sensor dust is temporary, so consider whether carrying that dust data into a reusable preset makes sense.
This method does not establish that every dark mark is sensor dust. A mark belonging to the photographed object should not be removed merely because it resembles a calibration defect. Keep the source and make any remaining local repair a separate, deliberate decision.
Related tasks
- Should I Use a White Wall or a Gray Reference to Set Photo White Balance?
- Use Lightroom Flat-Field Correction with the Right Calibration Frame
Sources and scope
- Removing sensor dust with an LCC profile: Include Dust Removal Information is recorded at LCC creation and applied with the reference.
Official Capture One support pages were read on October 23, 2026 (Asia/Shanghai). This is documentation-based guidance with proposed examples and acceptance checks, not a report of hands-on software testing. Controls and availability should be checked against the installed edition and version.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: Mariya Eskina / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.