
Photos on Mac distinguishes a high-frame-rate video's playback-speed choice from the time range of an iPhone Slo-mo effect. Apple's video guide documents both. Decide whether the goal is a different overall speed or a different moment becoming slow before adjusting the controls.
Mark the action you want to emphasize
Record the source clip and the visible event: for example, a jump should slow only while the person is in the air, while the approach remains normal. That requirement concerns the slow section's timing, not merely a slower playback choice for the whole clip.
Keep the original capture so the edited version can be compared without guessing which action changed. A frame-rate label in a filename is not sufficient evidence of the actual capture.
Choose the relevant control
For supported high-frame-rate footage, open the video, select Edit > Adjust, then inspect the playback-speed menu below the video. Available speeds depend on the capture format; the guide ties half-speed to at least 60 fps and quarter-speed to at least 120 fps. A missing option can reflect the source rather than a broken interface.
For a video recorded in iPhone or iPad Slo-mo mode, Edit > Adjust exposes vertical bars below the frame viewer that mark when slow motion begins and ends. Move those boundaries to the intended action. Do not confuse them with the trim handles that shorten the clip.
Review the transition
Play the lead-in, the emphasized action, and the return to normal speed. Check whether the whole event fits inside the intended section and whether the timing now communicates the right movement. The retiming-versus-interpolation guide describes a separate processing distinction; this Photos route does not claim to synthesize arbitrary missing motion detail.
Verify the delivered timing
Inspect the actual exported clip rather than recording only the requested control setting. Confirm duration and visible speed with the video delivery check.
This guide uses documented controls and an illustrative action example. It does not edit a clip, inspect its frame rate, or guarantee slow-motion quality. Keep source eligibility, overall playback speed, slow-section range and trim boundaries distinct when diagnosing the result.
Related tasks
- Should You Retimestamp or Interpolate Frames to Change Video Speed?
- I requested 10 seconds in 16:9. How do I check the actual AI video file?
Sources and scope
- Change and enhance a video in Photos on Mac: Edit > Adjust speed menu, source frame-rate conditions and separate vertical-bar Slo-mo timing controls.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance, not a claim of hands-on testing or independent review. Report a correction.
Cover: Pignatta / Pixabay, Content License. The city photograph is an illustrative source asset; it does not show this application or a test result.