
Before painting with Affinity Photo 2's panorama source-mask tools, click the correct stitched source image. The documented tools operate in the selected source context. If an overlap changes unexpectedly, check that selection before applying a larger brush or transforming the whole panorama.
Key Takeaways
- Panorama source selection determines the context for mask painting.
- Changing image contribution is different from correcting geometric alignment.
- A missing-area fill is a separate operation from choosing captured source pixels.
Name the overlap decision
The official panorama-editing guide distinguishes Transform Source Image from Add to Source Image Mask and Erase from Source Image Mask. It explicitly instructs you to select the correct stack image before using the mask tools.
For a proposed street panorama, one exposure may contain a clear shop sign while another overlaps it with a pedestrian. Your immediate task may be selecting the preferable captured contribution, not changing the building's geometry. Transforming corners to solve that content choice can create an additional alignment problem.
Compare a small source-mask edit
- Preserve the source images and a separate working version.
- In the panorama-editing stage, click the source whose contribution you intend to inspect.
- Read the transparent overlay that identifies unused areas of that source.
- Make one small reversible change using the appropriate source-mask tool.
- Inspect the recognizable sign or pedestrian boundary before extending the edit.
The manual describes Add as referencing surrounding stacked imagery, while Erase returns to the original image's data. Do not interpret those names as a universal promise that Add always reveals the source you happened to prefer. Check the actual overlap on the selected image.
Keep geometry and empty edges separate
If the shop sign is doubled because the images are misaligned, inspect Transform Source Image instead of repeatedly painting a mask. If there are transparent outer areas, the guide provides Crop and Inpaint Missing Areas. Those address another kind of boundary.
Inpaint Missing Areas is documented as enabled by default and acts when the final panorama renders. For a record that must distinguish captured detail from a fill, inspect and document that choice rather than assuming every edge pixel came from one of your exposures.
Accept the rendered overlap
Apply only after inspecting the selected contribution, neighboring seams and any affected people or lettering. Then review the final rendered panorama separately. A correct source preview does not establish that a different tool or final fill left every area unchanged. If the result is unsuitable, return to the preserved editing route and isolate source choice, alignment and missing-area handling one at a time.
Related tasks
- How Do I Repair a Panorama Stitch Without Duplicating a Building?
- Why Does a Hugin Mask Not Stop Bad Alignment Points?
- Should I Use Boundary Warp or Crop the Empty Edges of a Panorama?
Sources and scope
- Editing panoramas: Select correct stack image before Add/Erase source image mask; Add references surrounding stacks, Erase uses original data; transform and inpaint are separate controls.
Direct official documentation supports technical claims; original proposed examples and checks, no firsthand product test or measured performance claim.
Prepared by Imagild Editorial, the company editorial team responsible for these guides. AI assisted research and drafting. This is documentation-based guidance with proposed examples, not a claim of hands-on testing or an independent product review. Report a correction.
Cover: William Liu / Pexels, Pexels License. This is an illustrative source photograph, not an application screenshot or a generated test result.